Would These Fit?

[GHSER7]

Would these rock crawers off the WD21 fit my R50? I'm not sure about the backspacing and lug pattern. I am planning to do a 2" lift as well b/f I mount them.

 

from this link: http://npora.ipbhost.com//index.php?showto...20&start=20

 

thnx in advance!

[Acey]

THey should fit. The lug pattern is the same. Take a ruler and place it where the wheel meets the hub measure your backspacing to the back edge of the rim.

[GHSER7]

Yeah now that I think about it, I did have the '97 4x4 Pickup 5-spoke wheels on my '95 pathfinder. Although the Pickup was based off the WD21s and noth the R50s. My main concern is the back spacing. From what I read, people say go 4" to 4.5" on the R50s. He's saying 3.5" to 4", which has me a little worried. I guess worst case senario I can put a 1/2" spacer on there and maybe some longer lug studs, but is it worth the trouble then? lol