Gotrek Posted August 14, 2006 Share Posted August 14, 2006 Just want to confirm something. My GF had her frame fixed, to weld I'm assuming they disconnected the battery and the computer lost its Maps. Is this a correct assumption? She says her pathy now hesitates at soft acceleration off idle. I noticed it too and even stalled it once(slowing down from 50kph and accelerating softetly ) took it on a 250km run yesterday it runs fine just off idle it seems to hesitate and near stall. It was running fine before. Link to comment Share on other sites More sharing options...
cdhicks99 Posted August 14, 2006 Share Posted August 14, 2006 If they didn't unhook the battery before welding it could have sent some voltage back through the ground. Link to comment Share on other sites More sharing options...
Gotrek Posted August 14, 2006 Author Share Posted August 14, 2006 If they didn't unhook the battery before welding it could have sent some voltage back through the ground. And that would of.... Broken.... What exactly? I know the clock was reset and the radio stations as well so I'm pretty sure the battery was disconnected. Link to comment Share on other sites More sharing options...
cdhicks99 Posted August 14, 2006 Share Posted August 14, 2006 Hmmm? Might wanna wait for 88 then. Link to comment Share on other sites More sharing options...
Gotrek Posted August 14, 2006 Author Share Posted August 14, 2006 Hmmm?Might wanna wait for 88 then. Huh? You've lost me I don't know what you're talking about Link to comment Share on other sites More sharing options...
Slick Posted August 14, 2006 Share Posted August 14, 2006 check to make sure they didn't fry a wire down below or knock one loose Link to comment Share on other sites More sharing options...
cdhicks99 Posted August 14, 2006 Share Posted August 14, 2006 88 is the admin of this forum and he is very sharp when it comes to trouble shooting. Link to comment Share on other sites More sharing options...
Gotrek Posted August 14, 2006 Author Share Posted August 14, 2006 check to make sure they didn't fry a wire down below or knock one loose Nothing near the patch area. I changed the fuel filter yesterday and didn't notice anythingaround the battery. That's where I'm not sure where to start looking since the truck runs fine just a little more hesitant then usual. I remember my cavalier was the same when the battery was unplugged for more the 1 minute as it would loose the fuel/spark maps in the ECU and have to reprogram itself (by driving around for a while) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now