[sold WD21 "lego" wheels with 31x10.5 yokohama geolander a/t]

***sold*** to a jeep fan, he will be passing the wheels back my way once he un-mounts the tires, so if anybody want's the wheels let me know.

 

 

I picked these bad boys up and was planning mounting them on my xterra for a old school meets new(ish) school look, but I am reconsidering since I would like to go with an aftermarket set up.

 

the tires have 85%-90% tread left and the wheels are in good shape, even wear and tons left on them.

 

basically this is the set up one would have if they have a pathfinder with the big tire package so fitment should be no issue.

 

$450 obo

 

located in Edmonton

 

Hi, Are the wheels sold now too, or are they still available?

 

Chase

[Will an '87 auto trans swap into an 89 auto?]

Thanks a bunch Kingman, searched, but didn't look at the newer stuff. That's exactly what I needed to know.

 

Anyone want a useless 87 tranny? lol

 

Chase

[Will an '87 auto trans swap into an 89 auto?]

Hey everyone, my buddy's Pathy has the transmission quit on him a little while ago. It has an external cooler. We are looking to swap one from a parts Pathy that we have, only thing is, the 87 shifter lacks the 'power' button, but the 89 has it. Are the transmissions the same between 87 and 89?

 

The 89 is the truck we're looking to repair and the 87 is the donor vehicle. It is complete. What kind of a headache are we going to have getting this thing to work? Is it a direct swap?

 

Thanks all.

 

ChaseZero

[where you from]

Grande Prairie here. This place is devoid of Pathfinder people here, with the exception of Orangetang, whom I haven't seen around in forever.

[Any Albertans?]

Is there much for wheeling down in Edmonton?

[Clinometer On Terrano?]

Believe it or not, but the north american pathfinders actually had provisions in the dash for the Terrano clinometer. There are holes cut into the steel under the dashpad foam that cover up the rectangular holes that those speed nuts fit into. When I installed mine it went in secured with all factory hardware in the stock location. it even has a proper sized hole in the center to run power for the back lights. I'll snap a pic of my parts pathy. I exposed all of the holes in the dash on the parts one, so I wouldn't mangle my good dash.

 

I wouldn't be without it now! Everyone that sees it asks where it came from and if it's factory.

[JDM MAD TYTE STYLEZ YO... arrived today!]

Believe it or not, but the north american pathfinders actually had provisions in the dash for that clinometer. There are holes cut into the steel under the dashpad foam that cover up the rectangular holes that those speed nuts fit into. When I installed mine it went in secured with all factory hardware in the stock location. it even has a proper sized hole in the center to run power for the back lights. I'll snap a pic of my parts pathy. I exposed all of the holes in the dash on the parts one, so I wouldn't mangle my good dash.

 

I wouldn't be without it now! Everyone that sees it asks where it came from and if it's factory.

[Any Albertans?]

Grande Prairie, Alberta here, I've got a stock early 99 SE and a stock 91 XE 2 door. I don't usually count the '87 se parts pathfinder.

 

Chase

[Grande Prairie Area Wheelers?]

I'm from GP. I've got 2 Pathys, 99 SE and a 91 XE 2 Door.

 

Both are pretty mild. The 91's got BFG MT's. Didn't I see you on the TNT site?

 

Chase