LeakyQX4

@XPLORx4Did these require the bushings to be swapped out to be fitted? I ordered the same KYB's that are already in my QX4 (KYB #344382 from an F-250), and the lower bushings are too small like @hawairish had mentioned. I don't feel entirely comfortable boring them out as I believe it's likely what contributed the the bushing failure on the currently installed shocks.

I found out I have KYB #344382 for a Ford F250 Super Duty. I went ahead and ordered new replacement shocks. Will I have to replace either of the two bushings? I've read about people having to swap the top and bottom bushing around, or replace both entirely. Thanks.

Hi all, I have a 2003 Infiniti QX4 with a 4" SFD. I recently installed a full front end kit including new ball joints, sway bar end links, tie rod ends, lower control arms, and all the associated bushings. Now that the front end is refreshed, it's time to tackle the rear suspension. My rear shocks and lower bushings are shot and are in need of replacement. I purchased my QX4 with the SFD already installed and unfortunately I no longer have the previous owner's contact information to ask what shocks are currently on it. What are everyone's recommendations for rear shocks? Ideally looking for a direct fit and not a shock I will have to press new bushings into. Thanks!