shogunb
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by shogunb
-
-
So what nick do I need if I'm 1/4 Aus, 1/4 kiwi, 1/2 american???
The sunroof is custom sunroof. The original WD21 sunroof which I have here is 2in longer than the custom sunroof.
It looks like the dealer must have had it installed, I believe the following company made them:
i will send them some measurements and see if they can supply with some hardware
-
Hawairish is that short for Hawaii Irish?
I will have a check later on tonight and see what is going on.
Thanks your help
-
I went a Pick and Pull and got a sunroof on Sunday, before i even posted in forum above.
I have the whole assembly and all the bolts.
I think this Northridge edition is odd one in bunch.
I took a photo from the outside through the drivers door window glass.
Any way it has these plastic hinges for something and there isn't any bolt holes for wd21 style over cam latch.
Are there some odd ball pathfinder editions?
-
Second go at writing this, it disappeared. Use to own a 1992 Nissan Terrano Black TD27T Manual in Auckland New Zealand. Now live in Olympia Washington (USA). I recently brought 1995 Nissan Pathfinder (northridge editon) VG30 manual Gearbox.
Went to Pick N Pull and picked up a sunroof and low and behold the sunroof on the northridge edition is different from the standard wd21. I need some ideas on where to get the correct one. previous glued a thin piece of plexiglass in (real thin 1.5mm thick, 1/16")
I had to get homepage in New Zealand going again to drop a image or to on there.
Left side
Right Side
rear of sunroof.
Need a few pointers on where I may be able to find a sunroof.....
Also trying to sort Rpm gauge. I need to keeping the topics. I did do re-solder job on the original gauge, that didn't fix it. going to have a look at the signal to the gauge. Open to ideas.
Also whats up with NorthRidge edition, heres the vin sticker from the door.
Thanks folks for any help you can give me.
Help in identifying sound from Right Bank of VG30E Head
in 90-95 WD21 Pathfinders
Posted
Need help in identifying sound coming. I posted the video on youtube.
Replaced Knock Sensor. Before that completely removed the right cylinder head to drill to fix broken exhuast studs in the head. Reclocked TDC for Crank off of No.1 cylinder and reset timing based on that.
It Idles fine. Drives fine. No Errors Codes.
I'm wondering if I burnt a valve up when I had a exhaust leak through the exhaust header gasket. Replaced Gasket today sound didn't leave. Maybe the mating surfaces aren't flat and exhaust gassing are getting by.
Hopefully someone has a idea or two.
Cheers
Shogun