Jump to content

tiredpathy

Members
  • Posts

    13
  • Joined

  • Last visited

Posts posted by tiredpathy

  1. Fuses all check out ok and the wires as far as i can follow all seem to be ok. not sure where the wires from the ckp sensor go, i know one is ground and i get a 12 v sig from one when the key is on, and the third im suposed to get 5v when key is on and a metal object is touched to the end of the sensor. does that wire maybe go to pcm? could this be my problem with everything?

  2. The only code is for fuel level sensor and thats been on for almost 2 years. the problem before was i had no radio, horn, alarm,security light, dome lights, power windows and locks would only work if key was in the "on" position and no start. running out of ideas i was curious if the horn itself worked so i unplugged it and touched a wire from the pos battery terminal to the horn, it honked and i noticed the security light was flashing again. checked everything again and all works except dome light.

  3. Well i tested cam sensors and those were fine tested crank sensor and that failed, put a new crank sensor in and still wont start however if i unplug the sensor the truck starts and will run as long as i give it some gas. any ideas or help would be most appreciated! Thanks

  4. ok all im back, since my last post i now have power back to my security and all other electronics work. however now im getting no spark. i put new plugs in and still nothing. i have a hard time believing that all six of my coil packs went at the same time but what do you guys think? anything else that i can check/test? im at a loss here!

  5. i have an 04 pathy, the battery was out for almost a month and when a new battery was put in i no longer have a radio, dash clock, horn, alarm and my power locks and windows only work if the key is in the ''on'' position. is the truck in some kind of lock out mode or is it something else? oh yea the truck wont start either. please help!!!!

     

×
×
  • Create New...