[Low engine temperature]

Cant find any problems except for the thermostat sticking open.
I installed a new one, another brand, today.
Will use the car tomorrow 

[Low engine temperature]

I have a problem with low engine temperature in my '88 terrano.
A few weeks ago, I installed a new thermostat and it worked fine. Until recently. The needle hardly move now, especially when I turn the heat on.

I changed the thermostat because of to hot engine. But can this be a faulty thermostat again? 

  

[new muffler for Terrano -88]

Thanks

[new muffler for Terrano -88]

Hi,

I will replace the muffler in my -88 Terrano.

I must cut the pipe to be able to remove it. Seems difficult otherwise.

But, how can I fit the new muffler, the bend makes it hard to fit.

Any suggestions ?

 

[What did you do to your Pathfinder today?]

MIG welded on a bearing race for my strut rod on right side

[How to: Replace Strut Rod Bushings]

Thanks , that was useful!

They are the same. The dimension Da=55,9 mm (2.24 in) on both races.

 

[How to: Replace Strut Rod Bushings]

I am going to fix my struts and I have a question.

I am going to weld on bearing races. Searching the forum, I found that 2 types of races being used, LM67010 and L68111.

Are there any differences between the races? I have the L68111 race.

 

Thanks, Jörgen

[Clutch slip]

Update:

The clutch works fine after the adjustment

[Clutch slip]

Thanks for the reply

The clutch pedal had no freeplay at all so I did some adjustment.

Actually I had to release the pressure a lot and the test drive went well

I will take the car for a longer ride and test it. The slip seems to be worse, when the engine and transmission are hot.

[Clutch slip]

I have an issue with my terrano-88.

The cluch is slippning (correct word??) when accelerating.

The cluch is new(4 weeks) and I had it changed when the cluch started to slip while driving.

Does this car have a dual mass flywheel or is it solid?

Any ideas of the problem?

 

Thanks,

Jörgen

[I think, I hit a rock...]

You can take a look in this tread:

http://www.nissanpathfinders.net/forum/topic/32546-how-to-replace-strut-rod-bushings/page-2

[I think, I hit a rock...]

Thanks a lot RedPath88

[I think, I hit a rock...]

A few days ago, I felt a bump under my car

The mount for the strut rod is bent. How should I fix it? just bang it, take one from the donator and weld new cups etc?

 

 

 

[Who likes to fish ?]

This trout broke my rod

 

[Hello!]

Thats great . I never had a 4x4 before and a friend gave me his terrano-88 a years ago. To much work to sell it

[Hi :)]

I usually fisk at the Baltic sea with brackish water. I am trying to catch the Sea Trout

[Hi :)]

Thanks

 

[Hi :)]

Hi, I'm Jörgen from Sweden and I only recently found this forum

I have 2 Terranos, -88 4x4 both of them. One car is a donator

I use my Terrano as s fishing car and this is my first 4x4. I have only owned it a year now (I got the donator a few weeks ago)

I'm 50, married with 3 kid och the youngest is 6 years old.

Thanks, Jörgen