Jarrod90p
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Jarrod90p
-
-
The company I ordered the part from now has to order it from Nissan so it's looking like I won't be able to find a new egr tube I'm hoping for the best. I'm going to look into a junk yard solution when I have time
-
There is but I'm ping to get a waiver to exempt myself from the final emissions test.
In Washington if your car is 25 years old you don't have to do it anymore so I'm going to get a waiver for the last emissions test
-
http://www.nissanpartszone.com/Page_Product/PartDetail.aspx?ModelName=Pathfinder&ModelYear=1990&ModelSeries=WD21&FileType=277&SelectConditions=(1%3dW%3b2%3dVG30E%3b3%3dSE%3b4%3dMT.F5%3b5%3d4WD%3b6%3d4D%3b)&ShowConditions=(2%3dVG30E%3b3%3dSE%3b4%3dMT.F5%3b6%3d4D%3b)&seeDesc=False&goBack=True&SectionNo=&ComponentsNo=147 just ordered one from here I'm hoping they have it in stock
-
I put headers on and straight piped it and really just want the huge noise to go away.
I won't have to do emissions ever again will I need it?
-
I have a 90 pathfinder and I need a new egr tube bad! What do I do
-
any recommendations for an intermediate pipe i have emissions in august and am replacing my exhaust completely header back
-
K9sar what was the exact size of bolt and washer you used.
I just bought pacesetter headers
-
What size bolts do I need for my pacesetter headers 90 pathfinder 4x4 5spd
-
What size bolts do I need for my new headers
-
Thank you very much
-
i just bought pacesetter headers and my old manifold bolts are either broken or rusted what size header bolts do i need for my 1990 (wd21) pathy?
please and thank you.
-
The headers I'm getting have a collector diameter of 2.5" so that will be good.
I had a 40 on my 90 trooper it sounded awesome it also had a v6
-
Can I run a flow master 40 series on my pathfinder if it's 2.5"
-
I live in Washington and every site I look at says may not be legal in ca. Doesn't say anything about wa.
-
My truck is fuel injected
-
Awesome thanks
-
What mods do I need to do to make it work with stock exhaust
-
I'm new to this completely so if I put good headers on I can take off the stock manifold completely?
-
i decided im going to replace the shocks all around with tokico trek-masters and get new coil springs for the rear as well as replacing worn bushings.
-
Thank you guys this site is awesome.
-
I have a 1990 wd21 and am wondering what good but not too expensive UGRADE options I have.
I don't go off road but would like to be able to.
Please help
Egr tube
in 90-95 WD21 Pathfinders
Posted
What size bolt did you use because I can't find one anywhere that fits