joshboy22
-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by joshboy22
-
-
Anyone replaced the headlight bulbs with LEDs? I'm looking to do so and hoping to only spend around $40 cdn. Any help/ info would be awesome.
Thanks everyone!
-
On 9/3/2018 at 2:04 PM, joshboy22 said:
Just checked the MAF... Still the same problem.
Apparently a MAF can read the correct voltage and still be faulty.
-
BACK ON THE ROAD! thanks for all the insight guys... turns out that it was the MAF the whole time
-
1
-
-
Just checked the MAF... Still the same problem.
-
Just replaced the fuel pump. Hasn't changed a thing.
Checking the MAF next.
-
Hopefully getting my mechanic buddy to come take a look soon.
-
Lots of fuel and i just changed the fuel filter still no luck.
-
2000 V6 3.5 starts fine but only runs for about 3 seconds then sputters and dies. When i give it some throttle it dies even faster. Drove it two days ago and worked fine.
-
Hey guys, my 00' has a 3.5 not the more common 3.3. And my alternater shut the bed. I was wondering if an alternater for the 3.3 would fit the 3.5
Thanks
-
Have you been able to fix it? If so how?
-
A few months ago the fan for my A/C & heat randomly went to full speed (no matter what you selected on the controls) even if you turned the system off. And now it's turned itself to the lowest speed. The heat and A/C still work. Anyone else have this problem?
-
Thanks guys. I was told that it was a bad idea to tow while in over drive.... something about being to hard for the transmission (mine's an automatic).
-
The family and I are planning to move across Canada this summer,(5300km) I've never hauled a trailer with my path. Just wondering if anyone knows the max towing weight for a 2000 3.5l
Thanks
-
I'm looking to put a trailer hitch on my 01 pathfinder. Anyone put one on? Or know good brand? I was thinking about just getting a hidden hitch but I'm open to suggestions.
Thanks
-
I live in northern Alberta and it's currently -25c° and my window did get stuck down. After I read this topic I got myself a can of liquid wrench for the window grooves. But first I ran an entire can of break clean in all the grooves. Followed by the liquid wrench. So far it's like night and day. Hope this helps.
-
Thought so. Thanks guys :-)
-
I have a friend who likes to think he is a mechanic (he just quotes info off the web) and he was saying that there are chips out there that are plug and play for the R50.and so far I can't find any.have any of you? And is it worth it?
Thanks
-
I see you have a basket on your roof. I mounted my license plate up on mine. Just a thought.
-
I know that the 2000 model pathfinder had the option of a diesel engine (a 3.3 turbo and a 3.5 turbo) and was wondering if anyone knows if it's possible to swap out my 3.5 gas to one of the diesels? Any insight would be great.
Thanks
-
Mine is like that too.
-
Living here in gp. I do a lot of wheeling out at the dunes.
-
I'm from the east coast but I have been living out in grande prairie. There are some nice off road trails up here.
-
I found step by step video on YouTube on swaping out the lights.
-
I got a 2" lift level kit from one the npora members (can't remember his name right now) and I seen that a few other members have the same lifts. I was just wondering if there is a step by step guide? I have a Haynes manual and it looks like it's easy as dropping the rear and popping them in. And just drop the struts and put the spacers in place. Any info or personal experience would be a big help.
Thanks
front axel replacement
in 96-2004 R50 Pathfinders
Posted
The cv joints (front axels) are pretty much done on my 2001 3.5L R50. Will any other R50 year work for replacements? I'll be going to a pick-n-pull to source the parts.