lnuxxunl
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by lnuxxunl
-
-
Mr 510 runs a website called vg30.com
I believe he makes carburetor kits for the vg30e engine. It may be worth getting in contact with him to see about parts availability.
Thank you , I will try to contact him
although vg30.com gives "Under construction" message
-
Hello guys
I want to swap my 94 pathfinder fuel injection to carburetor system
I appreciate if you point me to exact instructions
considering that i'm from iraq & it's diffecult to
buy conversion kit here!!!
somy options to take carburator parts fro another
cars which may fit in my situation
I really appreciate your help
-
I think Cedric engine is VQ30DD not VG30 so what you think?
-
Hii Guys
Finally I found VG33 Engine but my friend working as mechanics suggest me
to swap my engine with v6 3000 Nissan cedric model 2001
as he said it's identical and fit.
your opinions important to me as I trust your knowledge
Thank you in advanced
-
More Q? guys
My pathy underbody is rusty can I swap it with another nissan models underbody
cause I aso can't find it's own one
-
Your engine is the VG30E as you know. The engine you should try to find out of the Navara and Terrano is the VG33E, an almost identical big brother. It bolts to the transmission the same so no issues there, the only thing is the mounts for the alternator and/or air conditioning are different and there is a difference with the crank pully as well. Otherwise it is virtually plug and play. Take all the components off of the VG30 and out them on the VG33. It is a fairly common upgrade here in the US. For a little extra power, put the cams from the VG30 into the VG33. I'm sure you could do all this with a little help. There are several threads on the swap, I'll try to provide a link later...
B
Thank you all guys specially to 'Precise1' U R the best!
But Navara pickup is not 4x4, isn't it?
I think my VG30E cams damaged so can I keep the VG33 cams without replace?
-
See if you can find a 3.3 liter out of a r50 pathfinder/terrano or even a Nissan pickup(Navara there?). There are other threads here that go into extra detail. Just do a little searching
^What he said is absolutely your best bet. It should bolt right in and you can use most all the equipment from the VG30 as well. I hope you can find one!
B
x3 the 3.3 would be a good option for you (if available there that is of course) which can be sourced from a r50 (the rounder- unibody Pathfinder) and I believe Xterra's though I don't know how mount setups and whatnot are on that particular donor (in this thread http://www.nissanpat.../page__hl__vg33 the member by the name "thehuntersam" talks of using some Xterra stuff on his swap, so at least some of it is an option) I remember an Aussie that used a Buick 3.8 Cyril to be exact, here is his build thread http://www.nissanpat...800#entry367347 ) So if you are skilled enough you can venture down different avenues as well
and welcome to NPORA
Thank you guys I really appreciate your help
Does the Navara & Terrano engine fit to my car front axle ?
I Feel Confused because this my first time to replace a whole engine
I need more information on how to easly swap this engine & what is the best choice
-
Hiii Guys
I have pathfinder 94 4x4 VG30E engine type need a replacement
but here in my country I can't find the same engine
so what the alernatives engine ?
I appreciate your help
Thank you
94 Pathy fuel injection to carburetor
in 90-95 WD21 Pathfinders
Posted
Thank you this really help me