Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

WarthogWD21

Members
 View Profile  See their activity

  • Posts

    35

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by WarthogWD21

  1. WarthogWD21
    Just checking. So I remove the timing belt cover and turn the engine from there? Or?
  2. WarthogWD21
    where are these arrows and dots? All I see is a gear on the bottom of the distributor and the gear that attaches to the cam ( I think ) and how do I get it TDC? Do I need to get to the timing belt? Sorry this is the first time doing anything like this for me. I attached a photo of what I see. Right now the alternator is pulled off with the bracket that holds it to give me access and the AC has been completely removed. Besides that it's all pretty stock.
  3. WarthogWD21
    how would I realign it??
  4. WarthogWD21
    When I pulled the valve covers, the driver side was blocked by the distributor so when I pulled the distributor and put it back in I think I screwed it up. Anyone know where I can get a diagram for the spark plug order? I put them back in the same order (I think). The vehicle was running great before hand and just gave me a code and I didn't check it(I know that was stupid). What would cause me to loose all power and stall if it isn't the camshaft position?
  5. WarthogWD21
    Ok I managed to pull the code from the computer and it is telling me the cam angle/position sensor is sending a code. (13) . Also a code (11) for engine coolant temp. Any ideas on how to fix this or what I should do? The car runs but it cant get into gear without stalling and I cant get it over 500 rpm. It occasionally pops. Any help would be great.
  6. WarthogWD21
    I have a 1988 3.0 V6 4x4. The check engine light came on and some work to the pathfinder by putting in new hoses, spark plugs, spark plug wires, and cleaning out gunk and grime. When I put everything back together everything went hay wire. When it turns on, I can't rev over 500 rpms or else I loose power, when I put it in gear, I loose power, and I think it might be the fuel pump, but I'm not sure. The engine light comes on after it stalls but I don't know how to diagnose it since its OBD1. Any advice?
  7. WarthogWD21
    Just exploring these threads a bit and I'm glad I'm not the only one who cut his roof off. I gatta say it makes it much more fun! How is yours working out for you!?
×
×
  • Create New...