CrazzyMax
-
Posts
149 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by CrazzyMax
-
-
-
This interest's me.
I hate the WD21 dash, i saw a 94 HardBody, and was thinking in swapping the dash also, but i forsee a lot of work
-
When i had 31", it was the only time the speedo was correct
-
Off course that these Fender Flares in FG will be used only for Mall trails
-
Looks very nice
-
Yeah, put those pillar gauge pictures, because i have 3 gauges to put in my other Terrano and i have to modify the pod
-
IMSA???????
This is FiberGlass, i'm no wizard, this was the first thing i made in FG, it's not finished yet
Still need some touch's, doesn't look like, but its 5" wide
-
I spent a lot of time looking for flares, but nothing came up, so i did this
-
You can make an adjustable panhard
-
Hey JMorgado, whats up
Are you looking for CV Axles or Solid Axles?
-
URRRaaaaa for the TD27T
-
I have that in mine for years
-
The TD27 is a great engine to improve performance.
Things that you can do.
The exaust has been said before.
The air filter, remove that filter and is box, i've put a Land Rover box and air filter with twice the size of the TD27 one.
Turbo, mine is just at 1 bar, i don't wan't more, because probably would brake faster.
The fuel pump, here's is the master mind, mine is just tweaked a little, 2mm of advance, a little more fuel, but a good fuel pump house, can modify the fuel pump, and tweak it, and the TD27, can reach 160hp with that.
Mine has only 134hp, but soon it will have a modified fuel pump, to reach about 150hp , its more than enough, and it will reach 6000rpm
-
My IC, from a pagero/montero
-
I have a top mounted intercooler on my blue Terrano, but on my grey one , i'm going to mount a front intercooler, probably from a Audi A6 Allroad, but with some mods
-
If you have good shocks, you won't notice much
-
My flex when the sway-bar broke
-
On Renegade i have 32x11.5x15 BFgoodrich MT on Dotz Racing 15x8.5 et -30
On SH i have 275/60r15 Fulda Tramp
-
My idle adjust isn't there, its lower, next to the fuse box
Its here, and it's stock, like all other TD27 that i know
-
My copy of Calmini
-
Hey JMorgado, welcome to this side of the Internet , ehehe
Those Azores pictures, always beautifull
-
I was looking for pictures, but this is the next best thing i could find
-
Mine is made out a of metal tube with a 72mm diameter and a 3mm thick wall, it's was the only measures of tube that i could make the curves without bending too much.
Sorry for my english
-
July 2011 TotM
in Truck of the Month
Posted · Edited by nunya
resize
No theme, so here goes