Jump to content

99silverRE50

Members
 View Profile  See their activity

  • Posts

    13

  • Joined

  • Last visited

 Content Type 

Posts posted by 99silverRE50

    NX4 Spacer installed

    in 96-2004 R50 Pathfinders

    Posted

    Nope, no mess up, if you read the instuctions, they provide details on how to secure the studs in place prior to installing. You may have missed a little step is all. You have a few options to secure the stud in place, one is to use an adhesive such as Loctite 454 adhesive gel or other chemicals as recommened in the instructions, or you could always spot weld the fasteners if you have such capabilities available to you.

     

    As an option, we offer the lower strut brackets ith the longer studs pre-installed, however the studs only have to be secured long enough to install and reach their proper torque value, thus an adhesive, after curing, should provide you with sufficient torque off to permit safe installation.

     

    Should you have any further questions on the install, don't hesitate to shoot me an email sales@nx4industries.com

     

    Cheers,

     

    Jeff

     

    Thanks for the reply, it was a long day and my brain was toasted so after couple beer and away from it I was actaully able to reach around it with a wrench to hold the bolt down to tighten the top. Thanks

     

    Here's a pix after everything including the 1" spacers installed.

     

    IMAG1102.jpg

    NX4 Spacer installed

    in 96-2004 R50 Pathfinders

    Posted

    Ok, I have a problem, All they sent me was bolts that doesnt have any knurls on the hex end side so now im stock of how to tighten the third bolt thats behind the spacer as it just spins when i try to tighten it and is to narrow to get in with any wrench? Did they fuked up?

    NX4 Spacer installed

    in 96-2004 R50 Pathfinders

    Posted

    Ok, I have a problem, All they sent me was bolts that doesnt have any knurls on the hex end side so now im stock of how to tighten the third bolt thats behind the spacer as it just spins when i try to tighten it and is to narrow to get in with any wrench? Did they fuked up?

    hello!

    in New People Start Here!

    Posted · Edited by 99silverRE50

    How much did you pay for the nx4strut Spacers? And did you get it in 3/8 bolts or 1/2 bolts ?

     

    I think the front really needs that spacer lol

     

    Thanks

    hello!

    in New People Start Here!

    Posted

    Well, I got the new wheels mounted and it seems to level much better then stock, I guess I dont need strut spacers after all.

     

    Ill take some pix later as right now its raining like nuts outside

    hello!

    in New People Start Here!

    Posted

    What other option do I have to raise my front 1" other then using the nx4indusries strut spacer? I heard you can use the emu spring to raise the front but I don't quit understand how that could possibly raise my front as the struts shaft is still stock ?

    hello!

    in New People Start Here!

    Posted · Edited by 99silverRE50

    Sup guys I may be the only Asian dude in here Lmao but Anway I'm from Minnesota and I have a 1999 silver pathfinder and its all stock but wheels and rims are on its way. Just keeping it a four season beast, nothing crazy like some guys here although itll probably be fun to do it Haha

     

    I do have few questions , the rims I got are the black pacer 15x8 -12 but I wasn't sure what the backspacing was, all they told me was it'll fit and stick out 1-1.5 out. These will be going on a set of BFGoodrich A/T 31-10.5-15 tires , what ya think ?

×
×
  • Create New...