Jump to content

NEWBSTER87

Members
  • Posts

    5
  • Joined

  • Last visited

Posts posted by NEWBSTER87

  1. Ok so I was installing a radio into my 92 pathfinder didn't take the ground wire off the battery and blew the radio/ac fuse. I replaced the fuse but now the ac wont work i'm afraid I just burned the circuit. I hope I blew a relay looks like whoever replaced the ac fuse last put a 20 amp instead of a 10 amp :/ any suggestions or help would be appreciated .

     

     

     

     

     

     

    Edit: Please avoid using all Caps. Using all caps make posts harder to read for the average forum user and many just skip over them instead of reading and helping. ;)

  2. The Vg33e engine and auto trans will swap into your pathy. If they used a tx10 transfer case then you are good there too otherwise you must use your old transfer case. P.s. good luck getting motor and trans in together in one piece. I pulled a Vg30e + trans + tcase all in one go before... even with the front of the truck half chopped up it wasn't easy. Doing it separately was much easier when I did it again.

     

    this is great news. i was thinking i might go aftermarket on the tcase any recommendations or do u usually use the TX10

×
×
  • Create New...