mrcoolguy6273
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by mrcoolguy6273
-
-
No need to cross post this in several section.. once is enough.
If you only want to drive straight then it will work
OK... or if you want to spend a lot of time and money converting an H233B to allow steering knuckles and all the associated mods, then yes, you can.
Or you can research a SAS options for out trucks here on the board, then ask questions to clear up anything you still do not understand
*deleting the other threads and moving this one to the sas/hardcore*
sorry for posting on other threads i was going to fix it but didn't know how, where would you get these steering knuckles and mods? or would you have to do most it myself thank...
-
could i use a rear axle from one pathfinder for a front axle on another (both 1992)???
-
chevy 350 motor swap???
Where you get a conversion kit for that i have a 1992 pathfinder and want to put 35s on it. So i can use the power, i was going to turbo or supercharge but i am thinking a 350 would be cheaper and have just as much hp (aspirated).
What kind of front axle should i get for my pathfinder also if i am going to be riding at that height and that much power?
Thanks.
-
prince george, bc. The northern capital of BC...
-
This would be for mudding and 4x4ing so best one to going about putting one on for more power/torque....? A turbo or supercharger on a KA24E ?
1990-1996 pathfinder?
-
DeWalt... Keep the motor in the bad bodied one and cut it up to fit them, LOWER CENTER OF GRAVITY! Seriously check your frames and make sure a body swap wouldn't be the better choice first...
Ya it aint cause its rusted and the one i got was from a body-man, so its in really good condition no rust!!!
What kind of lift with 35's?
-
So i got two 92 pathfinders and i am swapping the engine in too the one with the good body (engine blew).... Any way i also want to get a lift kit too eventually and i am not sure what to get and what would be the most efficient i am thinking of having 35" tires on it. And a 4" suspension and 2-4" body not sure yet. I was just wondering what your recommendations would be and what brand works the best (not too expensive but works great)
NISSAN PATHINDER 1992 SAS LIFT
in Solid Axle Swaps, Hardcore Custom Fab
Posted
ok so here is the deal i got 2 pathfinders and i am sticking the engine in one of them (both 1992). Any way i want to put a lift on it and every thing and do an sas. Should i use my rear axle from my one pathfinder for the front axle for the other?
Any way i just want all your opinions what i should do ( lift, sas, tires) My budget right now is 6000$
thanks
And i am thinking 35" tires.....
thanks ya'll!!!!