Jasontamu
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Jasontamu
-
-
Hi,
im wondering when is the next meet..........
or if someone with an 05 + pathy wouldnt mind meeting with me.....i need to take measurements of the rear opening hatch components off of a 05+ pathfinder.....
may need to remove the interior trim as well? depends.....
i can have some cold beers as we hang in the garage and measure away...
im currently working with a boat windshield (custom) manufacturer down in florida that is making me a mold of the nissan Xterra glass. in order to make an acrylic or lexan replacement. i then plan on purchasing pathfinder hardware and making the rear window on the xterra open like a pathfinder...
i would greatly appreciate the help.....................
-j
jasontamu2002@yahoo.com
-
HA! WHAT A RETARD I AM... FOR THE 2ND SWITCH, I WAS PLAYING WITH IT RIGHT NOW AND OUT OF NOWHERE I NOTICED THAT AT THE END OF THE THREE WIRES NEAR THE HARNESS IT SAYS:
BLACK - GROUND
WHITE/BLACK - SHK GRD
BLACK/WHITE - VALET
HA..EASY ENOUGH..
-J
-
OKAY! I FOUND THIS!!!http://www.nicoclub.com/FSM/pathfinder/1997_Pathfinder/
I NEED THE WIRING PRINT OUT FOR THE COLOR CODES FOR THIS SWITCH...OH MAN ALMOST THERE!!
ck.us/my.php?image=atoi2.jpg][/url]
update:
GOT IT!!!
well i found the power shift switch... from the diagram looks like i can get a typical switch use out of it by using pins 8 or 9.
now i just need to figure out the security switch!
-j
-
okay, sweet, i downloaded it, but im owned by the work computer, cant install it, so ihave to wait till i get home...boo...
-j
-
SIMON,
How do you open a .rar file from that site?
Could you send me the electrical pdf please?
Thanks so much for your help...
-j
-
oh, forgot to mention..I want to know what the wiring is, so i can use the switches for something else entirely...its not going back in the same year pathy...
I WANT TO USE THEM AS SIMPLE ON/OFF SWITCH TO ANOTHER DEVICE. LIKE A SINGLE POLE INLINE ON/OFF....
as far as the dash pic, ,please use as a reference to the location of the switches, im guessing from the looks of the body it was a 1st gen, but like i said the dash was beyond recognizable....rip pathy..
thanks for the link. ill be checking to see if i can find the wiring diagram from the FSM for sure...thanks
anyone else?
- J
-
Hi,
I pulled two switches from a 1st gen pathy and i needed to see if anyone had a FSM or could look at their manual and tell me what the color coded wiring to each switch went to.
Here is a picture i found only of the 1st gen dash?? well if its not the 1st gen dash then to help give you an idea of where i got them from. I really couldnt make out the dash perfectly because the junk yard pathy (RIP) i found had a lot of the dash missing!!!
1st switch:
Security Switch with red led light. labeled (on/off - impact off): Has a total of 6 wires coming out of it:
1. Blue/green stripe
2. WHITE/BLACK STRIPE
3. RED/WHITE STRIPE
4. WHITE/BLACK STRIPE
5. PINK/BLACK STRIPE
6. PINK/BLUE STRIPE
2nd switch:
AUTO POWER (E-AT) SWITCH: I THINK i can figure this out one since its only 3 wires.
1. BLACK/WHITE STRIPE
2. SOLID BLACK
3. WHITE/BLACK STRIPE
I'm thinking its a simple: #2>Load, #3>12V+, #4>Ground type set up... like a typical rocker...
It also has a red and black coming from the red led light, but thats of course is no problem.
What other pathy forums can i try to post this as well?? need all the help i can get??
Thanks so much,
- Jason
Jasontamu2002@yahoo.com
DFW - WHENS THE NEXT MEET....
in Southwest States
Posted
im in grapevine....near the mall.