-
Posts
36 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by outoway
-
-
Welcome! I would sure love to get a 2-door!
-
Hmmm easy one.... i got the old family car.... a 1973 Datsun 510 wagon with 500k on the clock.... I miss that car, as a month after getting it I flipped it!
-
not to hi-jack, but will the quest/villager 130 amp alt work on the pathy as well? I did that on the frontier i had previously.
-
and the reverse issue was common there is a fix but its a very detailed fix not for the average wrench turner
Is their a link to this. I may have someone that can do it.
-
good sugestion! will try that and changing the fluid.
-
You are right on on the Spirited driving, if i dont let off it will run up the the rev limiter if i let it. as soon as i back out of it it shifts (let off the peddle that is). As for the maint on the tranny, I was leaning towards changing the fluid, just havent had a chance. (not sure when the last maint was done on it... But it is parked at the moment till I get a chance to look into the probs!) Pathy has a new Radiator it at the moment, but I intend to put a after market cooler on.
-
Ok, I have looked threw many topics, and still haven't found the problems that I have with mine. May have missed it though!
Problems are:
1st: Going down the road with spirited driving, the tranny doesn't always shift.... if you let off a bit, she will go ahead and shift. Any ideas?
2nd: With pathy cold, if you shift into reverse, she shudders but does move. But, if she is warmed up, she does just fine.
Hopefully I'm not getting ready to have to put a tranny in, but if I do, I will!
-
those also came in metal as well. I agree that the plastic ones dont work as well.
-
The Jeep FC has been around since the 50's.... here is a cool ad:
-
About 30 miles each way here, but dont have to make it but once every 12-14 days!
-
Replaced the Thermostat..... would love to strangle the engineer that put it where it is at!
-
Cleaned out the HVAC system from all the leaves. Mounted the clip holder for my CB/mic
-
my 93 has 259,000 and some change
-
Put new plug wires on the beast.... after the # 6 one started to arc! (3 & 5 had done it already) Oh yeah, also tightened the fuel line claps on the line between the rails! That would have been a bad mix.... fuel and an arrant spark.... could have had a flame paint job! LOL
-
Well, put rotors and pads on the rear.... only to find that the right caliper was bad as well.... now have to finish up in the am!
-
I've never seen rear holders in a Pathy, but if your kids aren't using the little spin-out ashtrays, you could easily mount holders there. Then again, kids slam doors... maybe a holder on the back of the cooler would work better.
But yeah, fill that cooler with bacon and you're halfway to awesomeness. (The other half involves a frying pan welded to the exhaust manifold.)
Actually a small inverter and a small george foreman grill and bacon comes out great!
- 1
-
So is there any advantage on getting the 33x9.5 tires for trimming purpose? definitely would like 33's on my pathy
-
Got my exhaust done.... now gonna need rear brakes soon!!
-
Ok, had to go find some images....
How about a 521 for starters....
and a 620.....
-
Got new radiator in.... thought I had a tin tank one from the JY but was bent from someone hitting something so had to go new.... did get the muffler and tail pipe off that one though
-
never seen it on the hardbody, but do remember the ones on the 620 and 720!
-
Welcome!
-
Welcome to Pathyland (NPORA) !!!
Now you need an ARB with no T-bar crank!
yep! then would be just like the old one!
-
In Richmond here... not an R50 though!
Another Australian pathy
in New People Start Here!
Posted