northgapathy
-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by northgapathy
-
-
yeah, i listened to that, I've been on the other end of the phone, i worked in the front office of my dads car repair shop for years and its very clear to me that this guy did something to piss "steve" off, If anything it makes me like calamini more, it just shows that he's not gonna lay down and take crap from people, anyways, I can't seem to find the actual kit on the website, could someone help me out, where are you guys getting these prices from??
-
Well i'm definatly thinking about buying it, I was planning on an sas anyways, I already have my axle............................. how much is the whole kit going to be??
-
srry vsicks, i was talking to grimgreg, ure is a trail run for the southeast nissan owners club, didn't mean to confuse you, my bad man
-
it was speeding, i wasnt doing anything dumb, i got two speeding tickets, about a year and a half apart, and if your under 18 in georgia thats enough to get it suspended one was 16 over in a 45, and the other was 22 over in a 45 both on 4 lane divided roads
.. i am already planning on going to ure, so i will see you there
-
I lost my license in feburary as some of you know, and tommorow i'm finally going to get it back, in the six months i have lifted the pathy more bought a custom roof rack and bumper, put on a 9000 lb electric winch,and some other stuff, and i can't wait to test her out, anybody up for some north ga wheeling??
-
umm my dad has 17..........
05 titan
99 toyota sienna
2 1969 datsun roadsters
1970 datsun 240z
1970 datsun roadster
1970 datsun 510
1986 720 pickup
1966 ford longbed
1973 dodge charger(its got a 440)
mazda 323
mazda 626
mazda miata
96 ford explorer
subaru loyale
1990 240sx
1993 240
i only have one and thats my pathy
-
yep i got it, thanks
-
i actually did look on the plate on the firewall, i can install them myself my dad owns a japanese car repair shop that specializes in nissans, only reason i dont want to pull it myself is it gets pretty hot down here in the summer and the last place i want to be is lying in the dirt ripping apart a rear end, believe me i know what its like i worked in a junkyard for a year, didn't mean to piss anyone off, or belittle anyones opinion so i apoligize if i did, thanks for the help
-
To find out, simply look on the door jamb for the decal with all the tire information on it. You will find an axle code. HG46 means you have the H233b with the 4.6 gears. If it is different, just post up and someone will decipher it for you.
Seems like this is where to start Bud...
B
umm, that didn't help me any, but thanks anyways
-
it is a HG43, im guessing that makes my ratio 4.3, idk, would a 4.6 make a noticable difference? and i really don't want to pull the parts myself, yall know what i mean
-
im not sure which ratio i want yet but i'm runnin 33's, and im thinking about going up a size or two in tires, so stock won't do, but thanks
-
Anyone know where to buy ring and pinoin sets for my 93 pathfinder 4x4, i know 4x4 parts has them but i can't pay 500 bucks apeice, is their anywhere to get them cheaper??
-
i may be the only one who actually likes the front end on the older pathys, i mean if you think about it the whole truck is simple, so an elaborate grill would be out of place, in my opinion it looks bad a$$!
-
well, great job on that pathy, that thing looks sick
-
whose sas pathy is that, and what size tires are those
-
one upside to getting you license suspended..........no more buying gas hahahaaha
-
i've pulled a tranny on an r50 but it was an automatic, i've also pulled the tranny on my 93 pathy and it was a manual, its not a hard job, just take your time and don't lose your patience, a little tip, when it comes time to take out the top bellhousing bolts jack up the front of the motor, that will give you more room to get to those bolts which are on the very top of the tranny.....Good Luck
-dan
-
truckperformance only has flares for two door models, and i roll with four doors
-
pssh, i could make it, my pathy can do anything
-
where is that bad boy at, i want to give it a try
-
i sent in one too, we should do this to other maufactures as well, like bushwacker, they quit making those cut out flares, and i'd really like to have a set of tehm
-
yeah thats all there is around here too, and it pisses alot of people off, but i like it, i actually had to get pulled out by a wrangler once, and he said if he got me out i had to take the sticker off, but he couldnt pull me out, so the sticker lives on
-
replacing the starter is really easy on a manual, not sure if the auto is different
-
thanks guys, i apprecieate it, go bush
Calmini SAS avaliable!
in 90-95 WD21 Pathfinders
Posted
ok, yeah thats what i was seeing, and you guys kept talking about the whole kit so i got confused