Jump to content

neri33

Members
 View Profile  See their activity

  • Posts

    16

  • Joined

  • Last visited

 Content Type 

Posts posted by neri33

    Front bumpers

    in 86.5-89 WD21 Pathfinders

    Posted · Edited by neri33

    Harbinger: I like a lot the xterra but to spence to me, the roof rack always like it and design same model for pathfinder

     

     

    pic1

    machined brackets

     

    with basket

     

     

    unccpathfinder: if you use solidworks or pro-e software, I can send you the files to simulate in your computer

     

    Filthy Luker: the back bumper is more large than stock, I cut 3" of original design for better angle, and put JGC coils and custom base to avoid cut pigtail and I have 4" lift on back, the holes are for fog lamp but I have a problem with transmision to connect it when put reverse.

     

     

    detail light

     

     

     

     

    transworldmoto: I can't help with the construction of this, I don't know weld, but the cost is aroun 400 dlls plus ship, if you know weld or there is a shop near your location, I can send you the blue print, i think the cost is same but you save the shiping and add some modification.

    Front bumpers

    in 86.5-89 WD21 Pathfinders

    Posted

    That looks very similar to JPs bumper:

    yes it is

    i take the model from jp's and adjust to my path because the front on path is not flat (i think in hb no flat to).

     

    i have more details bumper (front and back) for construction regarding my experience when made it

     

    the back bumper is just my design, (I don't saw other like my back bumper)

    post-5-1137553787.jpg

    Front bumpers

    in 86.5-89 WD21 Pathfinders

    Posted · Edited by neri33

    I need to build a new front bumper for my truck.  doesn't need to hold a winch, just look decent, protect the front end well, and have good tow points.

     

    any suggestions?  post pics!!!

     

    hello, send me a e-mail, i have the blue print for front bumper.

    My mail is neri_genaro@hotmail.com

    post-5-1137302549.jpg

    warn premium manual hubs

    in 86.5-89 WD21 Pathfinders

    Posted

    hello all, i saw the procedure to change from automatic to manual locking hubs,

    but what's up with the lock washer?.

    for the automatic this lock washer is on inside slot, for manual, it is necesary?

     

    i changed automatic to manual locking hubs but the mechanic put the washer on outside slot, it is correct?

     

    thanks

    front shocks

    in 86.5-89 WD21 Pathfinders

    Posted

    one more question

    what is a good front shocks to use with UCA for 3" lift front?

     

    I have a rancho rs5000 #9116 rear with the JGC coils without cut pigtal with custom bases and I want to update front suspension

     

    thanks

    help with the engine

    in 86.5-89 WD21 Pathfinders

    Posted

    That's a wierd one...sounds like it's running in Safe Mode. Tried resetting the ECU by pulling the "ECCS" fuse for 30 seconds?

     

    Have you taken anything apart to look at it and see if anything's visibly wrong?

    thanks 88pathoffroad

     

    tomorrow I will go with the mechanic to make the diagnostic as you mentioned.

    I forget to mention that the truck is standar

    help with the engine

    in 86.5-89 WD21 Pathfinders

    Posted

    Hello everybody I hope you can help my with this problem on my Pathfinder 88

     

     

    When it starts it works well but coming to 2800 rpm begins to rumbling and pulls back and forward,

     

     

     

    Driving at low speeds without coming to this limit(2800 rmp) it works well

     

     

     

    I already changed filters, check vacuum hoses, I check the pressure of gas when the problem begins but it looks normal, I try to pull any engine code but there was no any code, also changed the MAF sensor but the problem continues.

     

     

     

    Any ideas or advise you can share

     

    thanks

×
×
  • Create New...