Jump to content

Eric

Members
  • Posts

    68
  • Joined

  • Last visited

Posts posted by Eric

  1. I don't post very often because I have other priorities and drop by when I get a chance or remember. Since I don't drive that much I don't have much that needs to be done to my rig. When I get my oil changed at the dealer they keep telling me my exhaust manfold needs replaced but I don't feel like shelling out $600 to fix it.

  2. Well my user number is pretty darn low (12) and I have a 95 pathfinder that I bought brand new with very low miles (51,000). I wish I could back out to the woods and run some trails but when gas went up I stopped going out there.

  3. I haved owned my 95 pathy since day 1. I quit my job shortly after I bought it and have been working from home since then. Since my rig is payed off and I don't drive it that much (last fill was a month ago) I can't afford to trade it in and take on a car payment. I may only get about 15-16 mpg but it beats shelling all that money for a new vehicle. I just filled up this morning and it was at 2.54 a gallon with a safeway club card. I saved 6 cents a gallon and it still cost me $43.00 to fill :furious:

  4. That sucks, I had some punks steal a combo rear brake/turn signal/backup light assembly off my old truck. darn thing cost $90 to replace. Take a walk around the neighborhood and see who has a broken light assembly.

  5. The bolts for this are about a 1/4 inch longer than the ones that hold the release mechanisim for the rear seats to be folded forward. Just grab that black strap that sticks out and pull up and the seats unlock. there are two bolts that should look familliar. Just take that bolt to ace hardware and find a matching nut and then find the matching bolt. They should be about an inch long. Here's a picture of what I am talking about

    seatltch.jpg

  6. Yeah, I was riding my motorcycle yesterday and some 12-13 year old kid walking home was with his buddies and flipped me off. On the flip side I had a lot of other kids waving to me. So it's not all bad, just a few nuts around.

  7. Yep, its just west of portland. I was out there about 2 years ago with some of the guys from nworc. 88pathoffroad was there too. The 2 middle pictures are of the hill that everyone was trying to get up. I only made it up 1/3 to 1/2 way up.

  8. I went out to Tillamook forest this weekend for a little fun. Unfortunately it was one of those quick and unorganized trips. Here's a few pictures I took while out there.

     

    tillamook1.jpg

    tillamook2.jpg

    tillamook3.jpg

    tillamook4.jpg

     

    * Pictures were sized down to save space and give 56K users a break.

  9. I can hear air and the rattle from the passenger side. I can only see a couple of the top botlts. I am not sure I am going to be able to handle this problem. I am going to check in with the d(st)ealer and explain it to them and see how much they want to rob me for the fix. I will request that they use the 300z bolts instead of the other.

  10. OK, I've got the exhaust leak like a lot of people aroung here. I havent been able to see the which stud is broken yet. I probably have to take off the heat sheild. I think it's coming fromthe passengers side. My question is how long Until I need to fix this ? Is it going to cause stress on the other studs?

×
×
  • Create New...