Trogdor636 Posted May 8, 2016 Share Posted May 8, 2016 Working on a friends Pathfinder, had a rat gnaw on injector 4 wire. Cleaned up wire, put a new connector in, but the vehicle is still throwing the code 51. Injector OHMS out the same as the others. I can hear it clicking with my mechanic stethoscope. Harness has power with a test light, and the wires have continuity. My question is, when the vehicle is running, the OHMS change for the other 5 injectors, however this injector stays at 13-14. Could it still be a faulty injector? Bad wiring? Needs to be smogged soon! Any ideas? Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted May 8, 2016 Share Posted May 8, 2016 I'm not great at electrical a tuff but have you tried disconnecting the battery to reset the code? Not sure what a stuck injector would give you when tested either Sent from my SAMSUNG-SM-N920A using Tapatalk Link to comment Share on other sites More sharing options...
Trogdor636 Posted May 10, 2016 Author Share Posted May 10, 2016 I have reset the code at the ECM multiple times, not by unplugging the battery. Code will be cleared, you start it and no CEL, turn it off, and then the CEL pops back on. Injector being stuck open is what I am starting to believe. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now