Stock Suspension Height

So I figured there’s probably already a thread on this, but I can’t find it. I’d just like to know the height of a stock R50 suspension. I’m replacing my shot stock setup, and while I’m at it, I want to get just a little more height out of it. Not exactly a lift kit with spacers, but just larger shocks and struts in general. Only looking for about an inch or two higher than stock. I don’t want to make it look obvious that it’s lifted. Sent from my iPhone using Tapatalk

Yes. I'm running Ironman 35 mm lift springs which are 400 mm in length (rear). I have procomp ES326500 shocks which are 15.94" compressed and 27.07" extended for travel of 11.13" This is basically the longest shock you can run for several reasons. Firstly, the compressed length is barely short enough for the bumpstops to work properly & avoid ruining the shocks at full compression. Secondly, if the extended length were any longer the springs would drop out. I did some trigonometry to ca