31-spline swap (or, How to install a rear mechanical locker in the R50)
If you know anything about me by now, it’s that I tend to research the hell of out of things and write long posts about it. Well, this one is about how to put a 31-spline locker into a Pathfinder (or Frontier or Xterra).
For the TL;DR crowd…
You can swap in two versions of 31-spline axle shafts from specific D22/U Frontiers into 33-spline R50 Pathfinder, D22/U Frontier, or WD22 Xterra in order to use mechanical lockers intended for WD21 Pathfinder, D21 Hardbody, and Y60/Y61 Patrol model
If you know anything about me by now, it’s that I tend to research the hell of out of things and write long posts about it. Well, this one is about how to put a 31-spline locker into a Pathfinder (or Frontier or Xterra).
For the TL;DR crowd…
You can swap in two versions of 31-spline axle shafts from specific D22/U Frontiers into 33-spline R50 Pathfinder, D22/U Frontier, or WD22 Xterra in order to use mechanical lockers intended for WD21 Pathfinder, D21 Hardbody, and Y60/Y61 Patrol model
