supersayianjim Posted November 2, 2017 Share Posted November 2, 2017 Hey there guys. new kid on the block. 87 2 door 5spd 4cyl pathy. looking for guidance on swapping a ka24de for a turbo project? my other current hits include a -89 s13 with a rb25det swap -94 sc400 with a 1.5jz so im kinda mechanically inclined. hope to learn some stuff from here. Link to comment Share on other sites More sharing options...
foul_mouth Posted November 4, 2017 Share Posted November 4, 2017 New guy, just bought a white '92 XEV6 with a popped head gasket. The truck will be a slow moving project. I'll be lurking a lot but feel free to say hi. 1 Link to comment Share on other sites More sharing options...
Niwigui Posted November 6, 2017 Share Posted November 6, 2017 (edited) Hi, I'm new to this forum, just got a 2004 Pathfinder LE Platinum edition with 126,000 miles. It seems to be running strong, just got a new lower ball joint to pass inspection in Masschusetts, and planning to travel cross-county USA over the next year or so. ¡Saludos! Nico Edited November 6, 2017 by Niwigui 1 Link to comment Share on other sites More sharing options...
Tank Posted November 10, 2017 Share Posted November 10, 2017 Hi all. I am in California and just got a 95 Pathfinder for 400 bucks. It was in a wreck and now has a salvage title. No biggy though. Its just because it cost more to fix than it was worth. It drives straight and starts, usually, every time. I plan to nickle and dime myself keeping it going and eventually it will be the rad vehicle it is known to be. I will be frequenting the posts here, absorbing info a lot. I look forward to meeting you all and Thank you for being here to help. 1 Link to comment Share on other sites More sharing options...
Burner505 Posted November 17, 2017 Share Posted November 17, 2017 Hi everyone. Just found this forum but Ive had my Pathy since August. 2001 Pathfinder SE 3.5 4wd, purchased for $360 and saved it from the scrap heap. The PO was scrapping it that afternoon due to a front end crash damaging the bumper, hood, pass side fender, and grille. The rear doors didn't open and the truck wouldn't drive over 25MPH once warm. Hope to meet some local owners and get advice and tips for this truck. Thanks! 1 Link to comment Share on other sites More sharing options...
mjotrainbrain Posted November 18, 2017 Share Posted November 18, 2017 Hi everyone. Just found this forum but Ive had my Pathy since August. 2001 Pathfinder SE 3.5 4wd, purchased for $360 and saved it from the scrap heap. The PO was scrapping it that afternoon due to a front end crash damaging the bumper, hood, pass side fender, and grille. The rear doors didn't open and the truck wouldn't drive over 25MPH once warm. Hope to meet some local owners and get advice and tips for this truck. Thanks! Do the rear doors not open due to damage from the crash, or are they just stuck? If it's from the crash, you may be getting into a lot more than you think. If they're just stuck, it seems to be a somewhat common problem, there's definitely info on the forum to help with that. Link to comment Share on other sites More sharing options...
pnw_pathy Posted November 23, 2017 Share Posted November 23, 2017 Hi guys, I am from the Seattle area and recently picked up a 2001 Pathfinder SE (pretty sure its an SE) with 95k on her. She runs strong and appears to have been maintained well, so I plan to follow suit because I'm trying to keep this rig for a very long time. Planning on doing a mild build for a weekend warrior rig and hoping to learn lots from this forum. Bone stock for now, currently piecing together my plans. So far loving this truck and its a big step up from my old beater Subaru wagon! 1 Link to comment Share on other sites More sharing options...
SuperBlackPath11 Posted November 29, 2017 Share Posted November 29, 2017 New member here. I have a 2011 Nissan Pathfinder LE. Purchased with only 43k mile on it. Sold my 2012 Nissan Xterra PRO 4X and looking to beef up the Pathfinder by lifting it and adding bigger tires and aftermarket rims. Purchased back in February earlier this year and already upgraded the center console plate to Carbon Fiber, added tint and wind deflectors. Looking to get rid of the push bars since I am not fond of chrome and prefer black. As of now the pictures I am uploading are from when I purchased it. Will post more recent pics later. https://ibb.co/dsLitR https://ibb.co/j3TE06 https://ibb.co/hm7UYR https://ibb.co/nhjbDR https://ibb.co/nOcJSm https://ibb.co/ddkitR 1 Link to comment Share on other sites More sharing options...
edub_81 Posted December 11, 2017 Share Posted December 11, 2017 (edited) Hi all, Recently purchased a single owner 97 SE with 67k miles. I bough a 2 strut spacer kit which I am planning on installing soon. The Pathfinder is in great condition except what sounds like an exhaust leak coming from the passenger front. Heres a picture of it: http://i48.photobucket.com/albums/f232/yopeepthis/BD569F57-48EE-4F2D-BCE7-F61349836C2E.jpeg Edited December 11, 2017 by edub_81 Link to comment Share on other sites More sharing options...
mjotrainbrain Posted December 11, 2017 Share Posted December 11, 2017 It looks very clean, good score! Fix up the little things, keep on top of rust, and enjoy it for many years to come! 1 Link to comment Share on other sites More sharing options...
Guest Posted December 14, 2017 Share Posted December 14, 2017 Here’s a little pathfinder porn for my new 03 LE 4wd. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
edub_81 Posted December 27, 2017 Share Posted December 27, 2017 Here are before and after pics of my 97 SE with SF Creations 2 spacer lift. <img src="https://imgur.com/a/ShnYl"> <img src=https://imgur.com/a/CLIra> Link to comment Share on other sites More sharing options...
Guest Posted December 29, 2017 Share Posted December 29, 2017 Here are before and after pics of my 97 SE with SF Creations 2 Looks good! Is that only spacers with stock springs? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
vmgotit Posted January 18, 2018 Share Posted January 18, 2018 Hello Nissan enthusiast, Not my first Nissan or Datsun. Started out with a 69' 240Z, Black on Black, manual, duel cabs, sure wish I still had it! Then had one of the first year Datsun pickups, put a 2000cc motor and 5 speed in it. Then a 71' 510 4door sedan. That all was a long time ago! Then this last year I was looking for a rig for my wife, separated, she wanted a small truck. So I found and bought her a 2000' XTerra, manual trans. She loves it too. Long story short, I needed something to drive for now while I am working on my Jeep XJ. Found my 89' Pathy! The last owner did lots of work to it, all the needed maintenance is up to date. Runs out great! Did not want auto trans. but shifts good and the price was right. Not sure how much I will do to Pathy, it is lifted, new Warn hubs, complete front end rebuilt, timing belt, tranny flushed and more. Would like a rear locker but not sure how much I want to put in this! Had many 4x4s over the years, definitely not new the four wheeling or modified rides! See you around, Vance. 1 Link to comment Share on other sites More sharing options...
ptab Posted January 22, 2018 Share Posted January 22, 2018 Hello all- picked up my '91 XE V6, 4wd, 5 speed manual a few months back and I am stoked about it! Bone stock besides new tires. Likely needs new axle assemblies and power steering gearbox (recommendations welcome). Other than that, it's a champ! 2 Link to comment Share on other sites More sharing options...
Cbiggy Posted March 5, 2018 Share Posted March 5, 2018 hey so i joined a little bit back but I still have no idea how to start a new thread. I know not to go around starting a bunch of bs threads but I'm still stuck on how to do it. Thanks Link to comment Share on other sites More sharing options...
mjotrainbrain Posted March 5, 2018 Share Posted March 5, 2018 hey so i joined a little bit back but I still have no idea how to start a new thread. I know not to go around starting a bunch of bs threads but I'm still stuck on how to do it. Thanks There's a button right at the top of each topic that says "new topic", just click it and edit the post, then post. On mobile it's large and centered, on desktop it's smaller and to the right. 1 Link to comment Share on other sites More sharing options...
Cbiggy Posted March 6, 2018 Share Posted March 6, 2018 There's a button right at the top of each topic that says "new topic", just click it and edit the post, then post. On mobile it's large and centered, on desktop it's smaller and to the right. Thank you, I guess I'm one of the last tech noobs. 1 Link to comment Share on other sites More sharing options...
Wroth Posted March 6, 2018 Share Posted March 6, 2018 Hi, I've been lurking these forums for a year now, using the search feature as you guys like to suggest, reading the forum rules. I've typed up an explanation of my truck, but with everything I've done with it the expansion was really long. Should I post it here. Member's ride? New topic? Or should I just put it all up and let the admins move it where they will? Link to comment Share on other sites More sharing options...
Citron Posted March 6, 2018 Share Posted March 6, 2018 I would put it in members ride area. That is where build threads are supposed to be. Link to comment Share on other sites More sharing options...
Wroth Posted March 6, 2018 Share Posted March 6, 2018 Ok, will do. Again, hello all and thanks for all the great information and personal experience. I live in Arkansas and I drive lots of dirt roads, but I don't get too crazy most of the time. Some nice mud on the right occasion and old logging roads that are now fairly technical trails. No serious bogging or rock crawling for me, I just like to explore and see places most people never will. I look forward to talking with you all, and I will try not to ask stupid questions (the only stupid question is the one you're getting sick of answering all the time and the answer is just a search away.) Link to comment Share on other sites More sharing options...
crat64 Posted March 8, 2018 Share Posted March 8, 2018 Ive recently purchased a 2004 pathfinder le...and ready to learn Link to comment Share on other sites More sharing options...
patriotmd Posted March 10, 2018 Share Posted March 10, 2018 Hey all, I'm 35 and have about 15 years of wrenching under my belt. I've worked on almost all makes and models, and have specialized in the VAG, BMW, and Subaru lineups.I just bought a fair condition Bayshore Blue(I think) 2001(.5?) Pahtfinder LE with the VQ35 for $3000. While I'm not super active on forums anymore these days, I thought I would at least get into a group since this is my first experience with a Nissan. Cheers, Aaron Link to comment Share on other sites More sharing options...
gregosnz Posted March 11, 2018 Share Posted March 11, 2018 Hi y'all Pathfinder... ahem Terrano owner from New Zealand97 R50 QD32 ETI diesel with the Astroad body kit 2" spring lift but didn't see much at front Link to comment Share on other sites More sharing options...
Mario527 Posted March 14, 2018 Share Posted March 14, 2018 Hola!! muchas gracias por el espacio para poder compartir anécdotas les presento mi path, la uso solamente para off road de fin de semana Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now