Rusty1967 Posted October 23, 2020 Share Posted October 23, 2020 I need to know what bushings I need to replace in order to correct it, also if I should start with the front end or the rear end of the car. Any other helpful advice would be greatly appreciated. Thanks everyone, Rusty1967- Dallas, Oregon Link to comment Share on other sites More sharing options...
Mattmill91 Posted October 23, 2020 Share Posted October 23, 2020 All 8 in the rear. 2 per control arm. 2 lower arms - 2 upper arms. Front - control arms have 1 or 2- I found compete ones on rock auto for ok price. I got the “white line” branded from summit. Good bushings. Cheapies from rock auto only lasted 1 year in particular some ac Delcos they fit but must’ve been for a sway bar not tough enough. Link to comment Share on other sites More sharing options...
Mattmill91 Posted October 23, 2020 Share Posted October 23, 2020 Check out this page from Summit Racing https://www.summitracing.com/parts/whl-w61705aDouble check make sure I linked proper ones for the pathfinder. Link to comment Share on other sites More sharing options...
Mattmill91 Posted October 23, 2020 Share Posted October 23, 2020 Rock auto shows control arms with ball joints for abojt $60 they are moog but they are $60 Link to comment Share on other sites More sharing options...
AlwaysWrenching Posted October 27, 2020 Share Posted October 27, 2020 I bought a complete set from TRQ. They are made in Taiwan. All 4 control arms with new bushing for like $130. So far they have held up great. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now