Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST

Death wobble


Recommended Posts

I need to know what bushings I need to replace in order to correct it, also if I should start with the front end or the rear end of the car. Any other helpful advice would be greatly appreciated. 

Thanks everyone, 

Rusty1967- Dallas, Oregon

Link to comment
Share on other sites

All 8 in the rear. 2 per control arm. 2 lower arms - 2 upper arms.

Front - control arms have 1 or 2- I found compete ones on rock auto for ok price.

I got the “white line” branded from summit. Good bushings. Cheapies from rock auto only lasted 1 year in particular some ac Delcos they fit but must’ve been for a sway bar not tough enough.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Welcome to NPORA Forums


Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.



  • Create New...