Teesetz Posted August 8, 2020 Share Posted August 8, 2020 Finally had some time to swap out a medium size pile of parts on the thing. Plugs, Wires, Distributor Cap & Rotor Fan Clutch, Fan Blade All new drive belts, Radiator Hoses and clamps. Just need to flush the system and I’ll be done for this go round. Link to comment Share on other sites More sharing options...
MiltonWATech99 Posted August 9, 2020 Share Posted August 9, 2020 A couple other things I would do while in there is clean/replace the engine air filter and clean the throttle body plate. If you notice your throttle cable is loose, tighten that up too. I noticed a small boost in performance doing all of that. 2 Link to comment Share on other sites More sharing options...
Teesetz Posted August 9, 2020 Author Share Posted August 9, 2020 Definitely! I recently did the MAF sensor and air filter. While I was in there I got in the throttle body with throttle bottle cleaner and a toothbrush. Dirtied 2 shop rags worth of carbon build up. Acts like it can finally breath again. lol. Link to comment Share on other sites More sharing options...
Slartibartfast Posted August 9, 2020 Share Posted August 9, 2020 I was surprised how much power my '95 got back when I cleaned the gunk out of the throttle body. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now