johann_peralta Posted November 20, 2019 Author Share Posted November 20, 2019 15 hours ago, Slartibartfast said: Sorry if I missed this earlier, what transfer case is that? np201. I believe it came in 57-68 dodge w100/w200/w300. 1 Link to comment Share on other sites More sharing options...
johann_peralta Posted November 21, 2019 Author Share Posted November 21, 2019 made the mid shaft to connect the stock t-case to the np201. Link to comment Share on other sites More sharing options...
johann_peralta Posted November 21, 2019 Author Share Posted November 21, 2019 had to drop the case to get the shaft in.. what a hassle Link to comment Share on other sites More sharing options...
johann_peralta Posted November 21, 2019 Author Share Posted November 21, 2019 heres the beginning of the passenger side mount. 3 1/2" bolts on the cradle side. Im planning on welding 2 tabs to the case and then use a pin/bolt through the tabs and the tube to make it like a "quick disconnect". Hopefully will get the other mounts knocked out soon. Link to comment Share on other sites More sharing options...
johann_peralta Posted November 22, 2019 Author Share Posted November 22, 2019 here is the case mounted up with 2 mounts. would like to get 2 more in also. I put 3/8" rubber bushings between the mounts and the cradle walls (after pic). Link to comment Share on other sites More sharing options...
johann_peralta Posted November 27, 2019 Author Share Posted November 27, 2019 Got driveshafts made for the car Link to comment Share on other sites More sharing options...
johann_peralta Posted November 27, 2019 Author Share Posted November 27, 2019 Link to comment Share on other sites More sharing options...
johann_peralta Posted November 27, 2019 Author Share Posted November 27, 2019 Rear one is a combination of a 2wd preface lift R50 DC that i took apart and clearanced, the front driveshaft of a 4x4 r50, and the slip yoke of the f350 Link to comment Share on other sites More sharing options...
johann_peralta Posted November 27, 2019 Author Share Posted November 27, 2019 front one is a combination of a wj front shaft, 4x4 r50 rear shaft, rear f350 shaft Link to comment Share on other sites More sharing options...
johann_peralta Posted December 4, 2019 Author Share Posted December 4, 2019 Finished the steering up. can turn the wheel with a pinky Link to comment Share on other sites More sharing options...
johann_peralta Posted December 4, 2019 Author Share Posted December 4, 2019 Link to comment Share on other sites More sharing options...
johann_peralta Posted December 4, 2019 Author Share Posted December 4, 2019 Link to comment Share on other sites More sharing options...
johann_peralta Posted December 5, 2019 Author Share Posted December 5, 2019 Here is how I got the track bar parallel to the drag link Link to comment Share on other sites More sharing options...
johann_peralta Posted December 5, 2019 Author Share Posted December 5, 2019 top portion of another t-case mount bracket Link to comment Share on other sites More sharing options...
johann_peralta Posted December 5, 2019 Author Share Posted December 5, 2019 3/8" rubber bushing in between to hopefully minimize vibration Link to comment Share on other sites More sharing options...
johann_peralta Posted December 5, 2019 Author Share Posted December 5, 2019 How it mounts together Link to comment Share on other sites More sharing options...
johann_peralta Posted December 13, 2019 Author Share Posted December 13, 2019 Link to comment Share on other sites More sharing options...
johann_peralta Posted December 13, 2019 Author Share Posted December 13, 2019 Link to comment Share on other sites More sharing options...
johann_peralta Posted December 15, 2019 Author Share Posted December 15, 2019 Link to comment Share on other sites More sharing options...
Slartibartfast Posted December 19, 2019 Share Posted December 19, 2019 Bet it's nice to have it rolling! How's it handle? Link to comment Share on other sites More sharing options...
johann_peralta Posted December 19, 2019 Author Share Posted December 19, 2019 3 hours ago, Slartibartfast said: Bet it's nice to have it rolling! How's it handle? Pretty well! I've been running around the neighbor hood in it frequently just listening and for anything odd. Other than clicking/clanking ball joints its been great. Sway bars help a ton! Link to comment Share on other sites More sharing options...
johann_peralta Posted December 19, 2019 Author Share Posted December 19, 2019 Link to comment Share on other sites More sharing options...
johann_peralta Posted January 8, 2020 Author Share Posted January 8, 2020 The balljoints were previously shot, so we replaced them. Link to comment Share on other sites More sharing options...
johann_peralta Posted January 8, 2020 Author Share Posted January 8, 2020 Link to comment Share on other sites More sharing options...
johann_peralta Posted January 8, 2020 Author Share Posted January 8, 2020 Made a temp track bar (made it drive so much better). Wont be making a new one until I get a tube bender. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now