Jump to content

Help!


tthomasd614
 Share

Recommended Posts

Hey all!

 

Im doing the infamous timing belt/water pump replacement and have almost dissected all the way down. However, I cannot for the life of me figure out how to loosen the tension on the belt that is connected to the harmonic balancer. I have a picture of it. Can anyone help?

 

 

 

IMG]https://uploads.tapatalk-cdn.com/20170910/8acf35ad2883de98866edcd0a0304958.jpg[/img]

Link to comment
Share on other sites

Belts and tensioners

 

https://uploads.tapatalk-cdn.com/20170105/a43cfa9cf89dfd122e27e549a423999b.jpg

Now for this wonderful tensioner.. unfortunately I didn't snap a picture of the bolt you must loosen but if you've gotten this far then you are mechanically inclined enough to figure out which bolt must be loosened to allow for the tensioner bolt to release tension.

https://uploads.tapatalk-cdn.com/20170105/da761d8d8e6ed8c68932df54a6e3d6a5.jpg

I think this is a picture of that tensioner bolt. It's hard to reach and you'll do well to make this:

https://uploads.tapatalk-cdn.com/20170105/e252a971defa3d30563137735d9192d8.jpg

https://uploads.tapatalk-cdn.com/20170105/03c9235ad3f8a0ffbea8c3188f90fadf.jpg

https://uploads.tapatalk-cdn.com/20170105/2904fd7effc2f4b1a195a6a0405718a2.jpg

 

 

Sent from my iPhone using Tapatalk Edited by onespiritbrain
Link to comment
Share on other sites

Sent from my iPhone using Tapatalk

Awesome! Thanks for the pictures! I’ll get to it this weekend and let ya know! Any advice you can give me from here until I’m finished?

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...