Saturn Posted July 18, 2016 Share Posted July 18, 2016 My 02 RWD pathy has been puking power steering fluid for some time now, after going through 3 bottles of it with stop leak and checking the pump and all lines around it I finally took off the skid plate and an H-shaped brace in front of the rack and noticed that the leak seemed to be coming from the drivers side boot, which has been completely ripped open. However, the passenger side has also been ripped and does not seem to be leaking. I don't have much knowledge of steering systems so far, so forgive my inexperience, but do the boots hold fluid? And if not, then where might the leak be coming from? Are there any well known trouble spots in this area? Thanks for your consideration! Link to comment Share on other sites More sharing options...
jyeager Posted July 18, 2016 Share Posted July 18, 2016 The boots don't hold fluid. Seems as though your seals are leaking and allowing the fluid to get past and into the boot on your driver's side. I'm not familiar with the rack enough to say whether you can readily replace a seal or whether you should get a new rack. Link to comment Share on other sites More sharing options...
hawairish Posted July 18, 2016 Share Posted July 18, 2016 Agreed, sounds like a leaking seal. The seal is serviceable, but not while the rack is on the truck. It's undoubtedly not a fun job, and one of those jobs where you end up rebuilding the entire rack (and still needing to buy other parts, like the boots) vs. buying a reman'd replacement. Although a replacement costs more, it's less work than rebuilding it (and the part has a warranty). Link to comment Share on other sites More sharing options...
Saturn Posted July 22, 2016 Author Share Posted July 22, 2016 Thanks guys,it sounds like I'll be taking it into a shop as this is a bit beyond me and I already have to replace my trailing arms and I'm doing that myself. Link to comment Share on other sites More sharing options...
Rebelord Posted July 22, 2016 Share Posted July 22, 2016 Replacing the rack is easy. No need to huge markup for a part you can swap yourself in a few hours. Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
DanF. Posted January 16, 2017 Share Posted January 16, 2017 Replacing the rack is easy. No need to huge markup for a part you can swap yourself in a few hours. Sent from my SM-G920V using Tapatalk Is there a write-up anywhere with pics. on this forum? My wife's '04 SE 4x4 is starting to leak PS fluid and the shop wants $700+ for the rack before labor is added. Link to comment Share on other sites More sharing options...
onespiritbrain Posted January 17, 2017 Share Posted January 17, 2017 (edited) ISO 68 Turbine Oil FTW You might could even try ISO 100 Turbine Oil but beware ISO 100 is THICK. Vane pump might not like 100. I can personally vouch for ISO 68 though, my rack was leaking like a sieve, and 68 slowed it waaaaaay down and the pump likes it just fine. Sent from my iPhone using Tapatalk Edited January 17, 2017 by onespiritbrain Link to comment Share on other sites More sharing options...
onespiritbrain Posted January 17, 2017 Share Posted January 17, 2017 If you put stuff in the PS system that is of a lower viscosity than spec PS fluid then you've exasperated the leaking problem. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Citron Posted January 17, 2017 Share Posted January 17, 2017 I don't think I would use Turbine oil in a hydraulic system. Hydraulic AW ISO 68 would be fine, but turbine oil doesn't have the right additives to function properly as a hydraulic fluid. Turbine oil is pretty plain, hydraulic oil usually has anti foaming additives, friction modifiers (sometimes called anti shudder) additives, etc. You might be able to get away with it, but not really how it was designed to be used. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now