NP670 Posted May 18, 2016 Share Posted May 18, 2016 Hey guys, Im new here. Just wanted to find out what are somethings i should be careful with when swapping trans. My 92 pathy's auto trans finally gave in. Have a 91 Pathy manual trans, all needed for swap is prepped. Any tips what to keep and what to remove from my 92? Link to comment Share on other sites More sharing options...
Slartibartfast Posted May 19, 2016 Share Posted May 19, 2016 Worth a read: http://www.nissanpathfinders.net/forum/topic/33748-harbingers-automatic-to-manual-transmission-swap/ 1 Link to comment Share on other sites More sharing options...
NP670 Posted May 19, 2016 Author Share Posted May 19, 2016 thanks Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
NP670 Posted May 27, 2016 Author Share Posted May 27, 2016 (edited) Clutch pedal bracket installed, master cyl installed...getting the bracket in is PITA, removing the whole dash but all that is done Sent from my SM-N910T using Tapatalk Edited May 27, 2016 by NP670 Link to comment Share on other sites More sharing options...
NP670 Posted May 27, 2016 Author Share Posted May 27, 2016 I need help on wirings for clutch switch.......Any tips? Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted May 27, 2016 Share Posted May 27, 2016 You could tap into the park or neutral wires of the inhibitor switch harness Sent from my SAMSUNG-SM-N920A using Tapatalk 1 Link to comment Share on other sites More sharing options...
NP670 Posted May 27, 2016 Author Share Posted May 27, 2016 Thanks Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
NP670 Posted June 10, 2016 Author Share Posted June 10, 2016 Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
NP670 Posted June 10, 2016 Author Share Posted June 10, 2016 Hey Coung, Heres the diagram Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
NP670 Posted June 10, 2016 Author Share Posted June 10, 2016 Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted June 10, 2016 Share Posted June 10, 2016 I think it'd just a simple monetary switch. Just wire the switch to the neutral wires. Sent from my SAMSUNG-SM-N920A using Tapatalk 1 Link to comment Share on other sites More sharing options...
NP670 Posted June 10, 2016 Author Share Posted June 10, 2016 Thanks Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
NP670 Posted June 18, 2016 Author Share Posted June 18, 2016 funny........no click after wiring.... Sent from my SM-N910T using Tapatalk Link to comment Share on other sites More sharing options...
NP670 Posted June 26, 2016 Author Share Posted June 26, 2016 UPDATE: trans swap completed, wirings all done and pathy running really good...Thanks for all the valuable info...Thanks guys... Sent from my SM-N910T using Tapatalk 1 Link to comment Share on other sites More sharing options...
Slartibartfast Posted June 26, 2016 Share Posted June 26, 2016 How do you like the manual? I've got a spare auto sitting around but part of me wants to swap to manual one of these days... and with 230k on my current trans I may be looking the decision in the face sooner than I'd like. (And don't forget to overfill it!) Link to comment Share on other sites More sharing options...
NP670 Posted June 26, 2016 Author Share Posted June 26, 2016 (edited) Love it! Swap prove to be a bit challenging but after all is done its all worth it, thanks to the help of our NPORA members all the info i need is here to complete the project. I was supposed to do a AT change out but i had a MT already standing by so i just did the swap instead. I didnt wanna have the same problem like the old AT. Way to go if you wanna avoid AT problems is go on ahead with the MT swap, If your going that direction, I'd be glad to help out. Sent from my SM-N910T using Tapatalk Edited June 26, 2016 by NP670 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now