Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST

heads


94 Pathy
 Share

Recommended Posts

Need help! What am I missing? I hate that we can't snap a pic of something & just pay it. I have all studs out that I can see, front pulleys & timing belt back plate disconnected from front of heads. They don't budge when I tape with a rubber mallet.

Link to comment
Share on other sites

There's a 10 mm bolt in the back holding the passenger head down and one in front of the driver side. Also, there are dowels to keep the head in place so you have to pull up.

Edited by Cuong Nguyen
Link to comment
Share on other sites

K, I found the little bolt. Time to pull upwards. I just figured they would give just a little by tapping the head with a rubber mallet. Guess not. Thanks Guys!

Link to comment
Share on other sites

  • 2 weeks later...

Heads are now @ the machine shop getting looked over. Gunna have the a couple studs taken out, springs & valves looked @, & port & polished. Can't wait to get my baby back together & running. Biggest purchase will be new shoes for her.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

Welcome to NPORA Forums

 

Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.

 

-NPORA

×
×
  • Create New...