Guest Posted March 21, 2016 Share Posted March 21, 2016 I have a 1995 pathfinder SE 4x4 with factory security built in. I go to program remote and follow instructions. Get to steps press and hold programming button wait 4 beeps and 5 beep pulse. But get just beep every 2 seconds. Hit button on remote but nothing. Remote is OEM with new battery. I don't get why my security system does not do what programming instructions States. Also if left alone as it beeps it will eventually stop beeping light on center console will flash 3 times with pause in-between then about minute later solid tone. Solid light and parking lights on until I turn ignition key on and it resets. Please help Link to comment Share on other sites More sharing options...
5523Pathfinder Posted March 21, 2016 Share Posted March 21, 2016 Check this out if you haven't already... http://www.nissanpathfinders.net/forum/topic/19755-fix-your-keyless-entry/ Link to comment Share on other sites More sharing options...
silverton Posted March 21, 2016 Share Posted March 21, 2016 the remote I got with my truck doesn't work either. but the alarm still sets the manual way by locking the truck from the inside. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now