cpeterson15 Posted March 11, 2016 Share Posted March 11, 2016 I have a body mount weld that has rusted away. Please let me know if this is a big issue and ways to fix this problem Link to comment Share on other sites More sharing options...
cpeterson15 Posted March 11, 2016 Author Share Posted March 11, 2016 This is the rusted weld on the body mount Link to comment Share on other sites More sharing options...
Pav Posted March 12, 2016 Share Posted March 12, 2016 Sorry to see you having frame rot. Before getting into how to go about fixing it, I would take a further look along the frame. Tap away with a small hammer and see what you are left with. If you have rot in that spot I'm assuming there is more, particularly towards the rear of the truck. Once you know how much you are dealing with and where the weak spots are structurally more people can chime in here with solutions. You also need to consider the laws where you live. In some jurisdictions it is not legal to weld up frames on passenger vehicles. 1 Link to comment Share on other sites More sharing options...
Slartibartfast Posted March 12, 2016 Share Posted March 12, 2016 Hopefully it's not as bad as it looks. Like Pav said, hit it with a hammer and see if there's still solid metal under there. Link to comment Share on other sites More sharing options...
cpeterson15 Posted March 13, 2016 Author Share Posted March 13, 2016 Thanks for the quick feed back. This is really the only problematic section of the frame I see. Would bringing it to a frame welding shop be a good idea? Link to comment Share on other sites More sharing options...
Pav Posted March 16, 2016 Share Posted March 16, 2016 I would still just go out there and tap away along the entire frame. Make sure to check out the horizontal portions too. There are drain holes along the bottom that get clogged up over time. You can use a screwdriver to poke around and open them up. If there is a lot of debris in the frame you will likely have to use your hose and shoot water through it to loosen it up. Squirt some...well a lot of liquid dish washing detergent to help break up the junk inside. I find its easiest having the front elevated to let gravity help move the water through it. Adamzan's keen eye noticed that the rear of the frame has already been plated/patched so it would be good to see how the work was done and how its holding up. If you see that parts are crumbling off then by all means go check out some shops that will weld it up. Link to comment Share on other sites More sharing options...
cpeterson15 Posted March 16, 2016 Author Share Posted March 16, 2016 Thank you I will do that. Over the summer I used Eastwood interior Frame coating on the inside of the box frame to slow any rust and on the exterior of the frame I used Eastwood rust encapsulator which has held up great. The patch is strong no issues with that. I may bring it into a weld shop and see what they can do I will update when I figure out if they can weld another patch over this hole. Link to comment Share on other sites More sharing options...
adamzan Posted March 16, 2016 Share Posted March 16, 2016 I hate to say it but you're going to find a lot more as you look. Best to get it patched up now. Most shops won't touch them. A good time to learn to weld. Or find a friend that knows how. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now