Chadius Posted August 28, 2015 Share Posted August 28, 2015 my leak is coming right from the seal on the transmission lines, can somebody tell me how to remove these lines? What tool would be best perhaps? It is the seal on the transmission itself not the the cooler Link to comment Share on other sites More sharing options...
NWT87PATHY Posted August 28, 2015 Share Posted August 28, 2015 Ac disconnect or a duckbill Sent from my E6560C using Tapatalk Link to comment Share on other sites More sharing options...
Chadius Posted August 28, 2015 Author Share Posted August 28, 2015 A duckbill huh? Link to comment Share on other sites More sharing options...
Chadius Posted August 28, 2015 Author Share Posted August 28, 2015 any other name for it? Link to comment Share on other sites More sharing options...
adamzan Posted August 28, 2015 Share Posted August 28, 2015 They are banjo bolts with copper washers. Sent from my SGH-I747M using Tapatalk Link to comment Share on other sites More sharing options...
NWT87PATHY Posted August 29, 2015 Share Posted August 29, 2015 Always been referred to as a duckbill..lol It's a fuel line disconnect tool Sent from my E6560C using Tapatalk 1 Link to comment Share on other sites More sharing options...
Chadius Posted September 26, 2015 Author Share Posted September 26, 2015 So I took my pathy to a rainbow muffler (local shop) they said they couldn't find the banjo bolts or lines anywhere, can anyone point me in The right direction of some? Link to comment Share on other sites More sharing options...
Chadius Posted September 30, 2015 Author Share Posted September 30, 2015 Any takers on a place to buy the tool and/or the banjo bolt? Link to comment Share on other sites More sharing options...
Chadius Posted October 19, 2015 Author Share Posted October 19, 2015 Is this a dumb question? Can these not be found? I'd like a replacement before I tried to take the line off. Link to comment Share on other sites More sharing options...
adamzan Posted October 19, 2015 Share Posted October 19, 2015 Its just a bolt head like 17 or 19mm and there is a copper washer to seal. You get get the bolts at nissan. Not too expensive. Or the jy. No special tools required.. Sent from my SGH-I747M using Tapatalk Link to comment Share on other sites More sharing options...
Chadius Posted November 22, 2015 Author Share Posted November 22, 2015 Yeah it was just a bolt, idk what all that duckbill talk was about but I took the bolt out slapped some shinny new smash washers in there and I still had a leak! Turns out it was a pin hole a couple inches down the line. I just took the line off wire brushed it and rolled in jb weld and held it vertical for a day so it would run down smooth, patched it up pretty well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now