unit6usa Posted August 5, 2015 Share Posted August 5, 2015 (edited) I noticed this plug after I removed the right hand exhaust manifold, I don't know what it is? Thanks for your help! Edited August 5, 2015 by unit6usa Link to comment Share on other sites More sharing options...
SpecialWarr Posted August 5, 2015 Share Posted August 5, 2015 Yea that is your oil pressure sensor. It should have a single wire with a female spade connector going to it. I the wire on my 1990 is a 20ga yellow with a single black stripe. Link to comment Share on other sites More sharing options...
djratlif Posted August 5, 2015 Share Posted August 5, 2015 The one next to the oil filter is the oil pressure sensor. Common problem after people change the starter. The wire rips off when you change it. (speaking from experience unfortunately) Look for a small wire dangling around the area. Usually easy to spot. Link to comment Share on other sites More sharing options...
PamPoovey Posted August 15, 2015 Share Posted August 15, 2015 I did that like a year ago and I still have not replaced the wire. I meant to tackle that when I changed the oil last month and totally forgot What do you suggest to replace it? Remove the starter to get to it or deal with the exhaust manifold area? Thank you in advance! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now