TowndawgR50 Posted April 23, 2021 Share Posted April 23, 2021 4 hours ago, Robster4777 said: Can the back glass be opened with the tire carrier in the closed position? 5 Link to comment Share on other sites More sharing options...
Carl_99QX4_yeww Posted April 5, 2022 Share Posted April 5, 2022 I've got two carriers pulled from junkyards the other day. Couldn't let them go to waste so if anyone has any ideas on what to do with them let me know! Link to comment Share on other sites More sharing options...
Rota Posted August 11, 2022 Share Posted August 11, 2022 Hey all, the rivnut tool that is commonly recommended in these threads has been discontinued by the manufacturer. Anyone have one still lying around that they'd be willing to sell? Or is there another tool that has been used successfully? Link to comment Share on other sites More sharing options...
hawairish Posted August 12, 2022 Author Share Posted August 12, 2022 14 hours ago, Rota said: Hey all, the rivnut tool that is commonly recommended in these threads has been discontinued by the manufacturer. Anyone have one still lying around that they'd be willing to sell? Or is there another tool that has been used successfully? Any similar tool will do...tons of options on Amazon still varying from $30 and up. Seeing a Beetro 14" unit that's at the low price range and has the essential metric sizes. Most kits come with both SAE and metric sizes, which is a plus if you have other uses. Mine still sees occasional use so I'm keeping it around. 2 Link to comment Share on other sites More sharing options...
Rota Posted August 22, 2022 Share Posted August 22, 2022 On 8/12/2022 at 12:09 AM, hawairish said: Any similar tool will do...tons of options on Amazon still varying from $30 and up. Seeing a Beetro 14" unit that's at the low price range and has the essential metric sizes. Most kits come with both SAE and metric sizes, which is a plus if you have other uses. Mine still sees occasional use so I'm keeping it around. Thanks! I've got one now and it seems to be pretty decent quality. Just need a step drill bit for the holes. I see you mentioned the ones from Harbor Freight. Did you use the one that's just a smooth cone that's essentially "stepless" or one with coarse steps to drill the holes in the body? Link to comment Share on other sites More sharing options...
hawairish Posted August 22, 2022 Author Share Posted August 22, 2022 18 minutes ago, Rota said: Thanks! I've got one now and it seems to be pretty decent quality. Just need a step drill bit for the holes. I see you mentioned the ones from Harbor Freight. Did you use the one that's just a smooth cone that's essentially "stepless" or one with coarse steps to drill the holes in the body? Coarse stepped ones. The two larger ones have sizes that are basically perfect for the rivnuts, though I rely on calipers to confirm the diameters. You want the hole to be the same size or a hair smaller; too large and the rivnut will likely spin. 1 Link to comment Share on other sites More sharing options...
The_Q Posted September 9, 2022 Share Posted September 9, 2022 Got lucky on Wednesday! felt like checking the junkyard inventory and there was a 97 pathfinder with a carrier that had been brought in the day before! swooped it for the Q yesterday, gonna go back tomorrow for the hole templates in bumper and for the hinges. I have been keeping my eye out for one of these for about 2 years lol. planning on getting it done up in the next few weeks! Thanks everyone in this thread who has posted their experiences and advice here as a resource. Link to comment Share on other sites More sharing options...
NIssanBoston Posted March 27, 2023 Share Posted March 27, 2023 Hey everyone, hopefully everyone is still around on this thread. I bought 01 silvas path from him and I'm having a bit trouble from the quarter panel warping. I know he has some support behind it but it seems like not strong enough. I have my old rig which has an oem carrier with the supports. So I cut that out this weekend and plan to try to make it work this coming weekend. I never worked with rivnuts so I'm not sure how I'm going to be able to attach the pem support to it. If anyone has any suggestions that'd be greatly appreciated. Also the Oem support has welded nuts on the back which I'm trying to decide if I should cut those off. I attached some photos as a reference Sent from my Pixel 7 Pro using Tapatalk Link to comment Share on other sites More sharing options...
Slartibartfast Posted March 27, 2023 Share Posted March 27, 2023 If you can fit the whole bracket in there, just use the nuts on the bracket instead of the riv nuts. The riv nuts are just a way to avoid having to deal with the brackets. Maybe you could remove the nuts and use the riv nuts to hold the brackets to the panel--but I would expect that to be a PITA to line up, and also weaker when you're done, and I don't know if there's enough length on the riv nuts to clamp through the bracket and still hold themselves in. From what I remember (and can see in the picture), that truck has great big honking tires on it, so any strength you can add to the tire carrier mounts will be a good thing. Link to comment Share on other sites More sharing options...
NIssanBoston Posted March 28, 2023 Share Posted March 28, 2023 Yep. Has a full size 35" spare tire on it right now. I'm going to have to drill out the riv nuts and somehow thread in the bracket I just cut out of my old rig. Not going to be an easy task that's for sure.. I could also fab up another bracket , but again Im not sure how the riv nut will hold the bracket without me actually installing it in the piece I mock up, which is going to be more difficult I'd assume than trying to just fish this piece back there and thread the bolt a couple turnsSent from my Pixel 7 Pro using Tapatalk Link to comment Share on other sites More sharing options...
Slartibartfast Posted March 30, 2023 Share Posted March 30, 2023 I removed a set of brackets from a WD21 and ended up cutting it up like you did on your donor, and even then there was some screwing around involved. Hopefully there's a little more room in the R50 quarter panel. Link to comment Share on other sites More sharing options...
NIssanBoston Posted April 2, 2023 Share Posted April 2, 2023 100% needs support behind all mounting points or else you run into this. Sent from my Pixel 7 Pro using Tapatalk 1 Link to comment Share on other sites More sharing options...
Slartibartfast Posted April 3, 2023 Share Posted April 3, 2023 That's gonna need some welding. Kinda scary to think that was holding the tire carrier on. Link to comment Share on other sites More sharing options...
jlduthie Posted April 3, 2023 Share Posted April 3, 2023 That’s fantastic info to have, thanks for sharing that. I have a bunch of rust repair to do on the rear quarter panels so on the passenger side I‘ll make sure to weld some reinforcements on the inside of that area while I’m in there before I mount the carrier. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now