Kyle94 Posted October 10, 2014 Share Posted October 10, 2014 The 1995 I just bought has an r50 transmission in it. With a wd21 t case. My 4x4 selector is all out of whack. 4hi is between 4hi and neutral and I can grab four lo at all. It's like the shifter doesn't move far enough. Does anyone know of the lockout plate (safety plate?) you have to push down to move into 4x4 lo is different between wd and R50? We used the one from the r50... Link to comment Share on other sites More sharing options...
Kingman Posted October 10, 2014 Share Posted October 10, 2014 I swapped bracketed when I put an R50 transmission in a WD. No issues. Link to comment Share on other sites More sharing options...
Kyle94 Posted October 10, 2014 Author Share Posted October 10, 2014 So you used the wd21 on the r50 trans or left it? I'm running the r50 one... Link to comment Share on other sites More sharing options...
Kingman Posted October 11, 2014 Share Posted October 11, 2014 I used the WD21 bracket. I kind of remember them being different Link to comment Share on other sites More sharing options...
Kyle94 Posted October 11, 2014 Author Share Posted October 11, 2014 Damn! Lol. Okay. I'll have to try shoving my hands in there to swap it out. Thanks. Link to comment Share on other sites More sharing options...
SpecialWarr Posted October 11, 2014 Share Posted October 11, 2014 Both are adjustable if I recall from what I saw in the FSM. Not that I have ever done that. Link to comment Share on other sites More sharing options...
5523Pathfinder Posted October 11, 2014 Share Posted October 11, 2014 Here is from the 95 manual... http://www.nicoclub.com/FSM/Pathfinder/1995_Pathfinder/tf.pdf#page8 Link to comment Share on other sites More sharing options...
adamzan Posted October 11, 2014 Share Posted October 11, 2014 You will probably have to change or move it. When I put my xterra tranny in the xterra tcase one actually was set better for the body lift, lol. Link to comment Share on other sites More sharing options...
Kyle94 Posted October 12, 2014 Author Share Posted October 12, 2014 Just took it out. 4x4 engages perfectly fine now. Minus being able to throw the shifter wherever lol. The r50 plate doesn't allow it to shift far enough I guess. Link to comment Share on other sites More sharing options...
Kyle94 Posted October 13, 2014 Author Share Posted October 13, 2014 Also. It was much easier to take the center console out and go through the floor than It would been doing it from underneath. Link to comment Share on other sites More sharing options...
Kyle94 Posted October 16, 2014 Author Share Posted October 16, 2014 Here's the difference. R50 one is on the top. Doesn't have near enough movement lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now