Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST

Random picture of your R50


CDN_S4
 Share

Recommended Posts

34 minutes ago, anthonyerco said:

Site won’t let me upload anything. File size too large. Bummer, I’m excited about them gem I just picked up. Have big plans for her! Woo! 

You have to do it through a photo hosting site. I use Imgur

 

Once it’s uploaded to imgur, you find the option for “copy link”, then on the forum there’s an option at the bottom of your post to insert other media from URL, post the link there and it should work 

  • Like 1
Link to comment
Share on other sites

bU9XDC2.png

My old 3.2 diesel r50 flexing it out on the way to Montgomery hut on the west coast. Procomp es326500 rear shocks, would definitely recommend. These require the rear spring to have a free height of at least 400 mm.

  • Like 4
Link to comment
Share on other sites

  • 2 weeks later...

Posted this on FB but keep forgetting to post it here. Got good and stuck a few weeks ago. Ending up calling my buddy with a winch after several failed attempts from passerby's. Had 8" of water in the cab at one point but managed to drive home 11 hours later, after getting the 5+ gallons of water out of the fuel ?. Hardly any body damage, just a tiny dent and scratch!

 

xgCQ15B.jpg

 

Gj04ZwH.jpg

Edited by DesertKyle
typos
  • Like 9
Link to comment
Share on other sites

Adjustments.JPG

Got my LR9447 and AC spring lift installed. Bilstein shocks in the rear, SC creation control arm brace. KYG struts in the front. 285/75r16 tires.


Sent from my iPhone using Tapatalk

  • Like 11
Link to comment
Share on other sites

5 minutes ago, Gmar11 said:

Adjustments.JPG

Got my LR9447 and AC spring lift installed. Bilstein shocks in the rear, SC creation control arm brace. KYG struts in the front. 285/75r16 tires.


Sent from my iPhone using Tapatalk


Those Falken Wildpeaks look beastly! Do you have any any spacers up front or just the AC coils? Any weight in the boot? There looks to be very little rake and I'm jealous haha!

  • Like 2
Link to comment
Share on other sites

Those Falken Wildpeaks look beastly! Do you have any any spacers up front or just the AC coils? Any weight in the boot? There looks to be very little rake and I'm jealous haha!

 

 

Thanks man! No sir, I suppose the spare tire might add weight. I’m keeping it on just to fill up the visual gap under the bumper.

 

I also think the 33in tire really helps fill the wheel well gap, there’s a slight rake and I was pretty worried but it turned out pretty good!

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

4 hours ago, Gmar11 said:

Adjustments.JPG

Got my LR9447 and AC spring lift installed. Bilstein shocks in the rear, SC creation control arm brace. KYG struts in the front. 285/75r16 tires.


Sent from my iPhone using Tapatalk

Wow!

 

Rig looks incredible. I love the meaty rubber, did you need wheel spacers to keep from rubbing? 

  • Like 1
Link to comment
Share on other sites

Wow!
 
Rig looks incredible. I love the meaty rubber, did you need wheel spacers to keep from rubbing? 

Thanks man! And no wheel spacers, just 4.5in back spacing method wheels. I took the front mud flaps off and I did some trimming on the inner fender well plastic.


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites

On 5/5/2020 at 4:22 PM, Gmar11 said:

Adjustments.JPG


Sent from my iPhone using Tapatalk

Nice rig! I have a silver one too with the black rims, just added lift and now I'm looking at replacing the tires. What do you have on yoirs?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

Welcome to NPORA Forums

 

Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.

 

-NPORA

×
×
  • Create New...