mikestewart395 Posted July 22, 2014 Share Posted July 22, 2014 This is how I fixed my fuel gauge. For a long time it never read correctly. When I filled it up it would read 3/4 . And when fully empty I would have to wait for the light to come on to know. When I pulled the sending unit from the tank to rewire it last week I cleaned the electronic slide that is attached to the float. Simple. I wrapped a small bolt with wet sandpaper and lightly cleaned the slide area. Now it makes full contact and today was the first time I have seen it read full in a long time. Sorry for the blurry pic., I was a little hammered that night.It looked focused to me then. Sandpaper is pointing to the silver slide area to sand clean. It was black before I cleaned it. Years of bouncing around in there. Hope this helps someone. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now