Jump to content

Automatic to Manual swap


Mkeesucker
 Share

Recommended Posts

Anyone done this swap? I really want mine to be a 5 speed. I have seen someone on youtube say that they have done the swap but i can not find anything about it on any forums. Any direction would be great. Thanks

Link to comment
Share on other sites

I followed the Haynes manual to be honest, all the bolt holes are there including clutch pedal, lines, etc makes it really yes, but there is a couple tricks, like when you remove the trans you'll notice a bunch of wires and a switch that's controlled with a cable via your shifter, stick it in N or P (someone confirm this for me I'm not to sure since I did it the hard way) then take it off and lock it into position, I cut all the wires and then it was a nightmare to figure out the no start issue after wards. Otherwise if you have a donor and a week or two, also a homie or two doesn't hurt, should be no issue.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...