Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST

extreme camber or toe in.


Recommended Posts

Well I have ruined a good pair of tires. Not sure the issue is extreme camber or toe in, but the front tires are both worn on the inside edge. What is the cause, just an alignment issue, or inner and outer tie rods?


Thanks Pete.

Link to comment
Share on other sites

You should try to pay closer attention to how your tires are wearing, they don't wear like that over night. At least if you have a bad alignment or worn parts and catch it quick enough you can rotate the front tires to the rear and they may straighten out.


But as Adam said either the alignment is off or one of the other parts he listed is worn, best to jack up the front end one side at a time and see if there is any play.

Link to comment
Share on other sites

Wear on the inner shoulder of the tire indicates either excessive negative camber (tires look this this from the front: /---\ ), toe out (tires look like this from the top down, \---/ ) due to improper alignment, or severely worn suspension components (tie rod ends, ball joint, bushings) which cause excessive toe-out while driving. Worn out struts will typically cause feathering, cupping, or other types of abnormal tire wear.


If the tires aren't showing steel belts on the inner shoulder, rotate them to the rear immediately, go get an alignment (and have your suspension inspected for excessive wear), and you should be OK.

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Welcome to NPORA Forums


Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.



  • Create New...