nismopathy93 Posted April 3, 2012 Share Posted April 3, 2012 Hey guys i just swapped motors on a pathy that had been dead for 4 years and the tach was working great the first day and now it works and then bounces all over then stops any Ideas?? Link to comment Share on other sites More sharing options...
unccpathfinder Posted April 3, 2012 Share Posted April 3, 2012 Replace the tach in the dash...or full gage cluster...my gfs before I swapped over a new cluster (put her speedometers/odor in the new cluster) Link to comment Share on other sites More sharing options...
pulxar Posted April 3, 2012 Share Posted April 3, 2012 Same thing happened to me - I swapped the cluster and it fixed the issue. Link to comment Share on other sites More sharing options...
nismopathy93 Posted April 5, 2012 Author Share Posted April 5, 2012 thats what I figured I would need to do thanks guys Link to comment Share on other sites More sharing options...
Precise1 Posted April 5, 2012 Share Posted April 5, 2012 You have a small chance that tightening the brass screws on the back might fix it. Also, I had a dead tach in a parts truck that came back to life after being swapped (2 clusters to make 1 fully functioning one). I literally can't explain it. B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now