Torsion bar woes

[jwmyers23]

I have installed a 3" suspention lift from 4x4parts.com (I think that's what everybody calls AC). I got the rear springs and the UCA's. After the install I had the pathy alined and now it sets like it has a rake to it. The question is would new torsion bars level it out and if so what would be the best and fairly priced ? I have to replace my bars and torque arms any way due to the pathfinder becoming airborne and landing hard. It stripped out the tourque arm and the only way I could get the old girl to keep her nose up was to weld the bar and arm together (I know heating the bar will take the spring out out it). I need to get it fixed asap !

 

Here is the stripped torque arm.