JayD Posted December 23, 2010 Share Posted December 23, 2010 (edited) Ok, so I got this airsoft pistol from a friend, who says its broken... He says when he puts a CO2 cartridge in it, it all hisses out. It is a Wal-mart brand Taurus 24/7 Replica model, don't know exact specs, but what could cause it to just leak out...? I know there are some Airsoft nuts around here, just wanted to get y'alls input before I Edited December 23, 2010 by JayD Link to comment Share on other sites More sharing options...
skulptr Posted December 23, 2010 Share Posted December 23, 2010 get a new clip or a rebuild kit for the clip. my cousin has a cheapo walmart one like that and it has bad seals in it, so the moment you break the co2 seal, it all runs out. course, the ultimate solution would be, dont get something walmart.... Link to comment Share on other sites More sharing options...
JayD Posted December 23, 2010 Author Share Posted December 23, 2010 Ah they have rebuild kits? The guy I got it from said that he was loosening the brass fitting that the Cartridge fits into on accident (ionno, hes an idiot) and he said it wont seal. Link to comment Share on other sites More sharing options...
SilverPath Posted December 23, 2010 Share Posted December 23, 2010 They are mainly just o-rings in the expensive models so I assume they are in walmart stuff. I've never dealt with them. Co2 has no lubrication properties such as green gas. So take some 100% silicone spray and lubricate all the moving parts. If you can take out all the seals in the mag and leave them in silicone bath for a bit say 24 hours they will be ready to go. If not just pick some cheap o-rings up and replace them. Link to comment Share on other sites More sharing options...
JayD Posted December 23, 2010 Author Share Posted December 23, 2010 OK, so one just large enough to fit between the Co2 cartridge and the mag? It's a pretty intricate design, hard for me to explain..... Link to comment Share on other sites More sharing options...
iPath Posted December 23, 2010 Share Posted December 23, 2010 speaking of airsoft guns, I have a problem with one I bought years ago too. Only shot it a couple times and took it to a friends house when I was younger, he was playing around with it and it just stopped working. It isn't jammed as far as I can tell and nothing inside looks broken. I guess I can post pics of the internals if you guys want Link to comment Share on other sites More sharing options...
ANDY Posted December 23, 2010 Share Posted December 23, 2010 wal mart is the spot man if there is no wal mart where you going to buy your chonnies?? ha ha jk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now