RF600 Posted June 12, 2011 Share Posted June 12, 2011 The struts for my car are done. I think they turned out pretty good. The coil over sleeves fit a little loose so I added a second bead around the strut. Ground it down to make a snug fit. Most of the fixes is to put rubber o rings on then put on the sleeve. The o rings will eventually deteriorate. I only wanted to do it once. Link to comment Share on other sites More sharing options...
TerranoNZ Posted July 2, 2011 Share Posted July 2, 2011 More stuff from work A giant muffler Arty stuff that my foreman made, pretty cool Plasma cut NZ from 1.2 SS I made for my sister. Link to comment Share on other sites More sharing options...
TerranoNZ Posted February 18, 2012 Share Posted February 18, 2012 Finished the manifold for Nils in Norway Today I made a spill tray for another customer, has to hold 2 44gal drums. Underside with reinforcements, 2mm EG sheet. and how was I to get it home? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now