XcrawlerkidX Posted January 20, 2010 Share Posted January 20, 2010 I have a 95 Nissan Pathfinder and it has 31's. Me and my dad want to but bigger tires on but we cant find anything for lift kits or anything for 95. We would like to put at least 33's on it. BUt do all we need is a body lift or could you just have a hockey puck body lift. So my question is can i put 33 with out a lift kit or body lift. and my other question is. Are there any lift kits out there? Thank You for your responses. Link to comment Share on other sites More sharing options...
Morningwould Posted January 20, 2010 Share Posted January 20, 2010 Use the search feature. You will find all the info you are looking for. There are a few different suspension lifts available, as well as body lifts. Link to comment Share on other sites More sharing options...
Precise1 Posted January 20, 2010 Share Posted January 20, 2010 Look in the Garage section pinned up top and in the How To section. There is even a list of sources for after market parts... Nothing personal, but this question has been asked 3x a month for about 10 years so we prefer you read the existing information and then ask questions... In short, to run 33" tires, you will need a 3" suspension lift and a 3" body lift, or a sawzall. Let me know if you can't find the info I refered to. B Link to comment Share on other sites More sharing options...
XcrawlerkidX Posted January 20, 2010 Author Share Posted January 20, 2010 Look in the Garage section pinned up top and in the How To section. There is even a list of sources for after market parts... Nothing personal, but this question has been asked 3x a month for about 10 years so we prefer you read the existing information and then ask questions... In short, to run 33" tires, you will need a 3" suspension lift and a 3" body lift, or a sawzall. Let me know if you can't find the info I refered to. B sorry im new to this website Link to comment Share on other sites More sharing options...
Morningwould Posted January 20, 2010 Share Posted January 20, 2010 No body lift yet. Just 3 inch suspension and a lot of cutting. Those are my new 35's Link to comment Share on other sites More sharing options...
XcrawlerkidX Posted January 20, 2010 Author Share Posted January 20, 2010 nice. Link to comment Share on other sites More sharing options...
andreus009 Posted January 20, 2010 Share Posted January 20, 2010 No body lift yet. Just 3 inch suspension and a lot of cutting. Those are my new 35's Out of curiosity how much did you have to cut and how did you cut it? Link to comment Share on other sites More sharing options...
Precise1 Posted January 20, 2010 Share Posted January 20, 2010 sorry im new to this website Hey, no problem. Just giving you a heads up, that's all. There is a lot of info here, probably more than you can read. Nice truck BTW!! Looks almost exactly like mine.... No body lift yet. Just 3 inch suspension and a lot of cutting. Those are my new 35's Cool!! What IFS mods do you have to go along with those 35's?? You haven't regeared, have you?? How does the motor handle those?? B Link to comment Share on other sites More sharing options...
YoungWheelsCT Posted January 21, 2010 Share Posted January 21, 2010 you can check out www.4x4.com they have some cool parts like a suspenion lift n other parts i found its a good start for parts for pathfinders Link to comment Share on other sites More sharing options...
Morningwould Posted January 21, 2010 Share Posted January 21, 2010 Out of curiosity how much did you have to cut and how did you cut it? I cut roughly 3 inches in the front, and then rolled the lip in. It goes up to the body line. The rear I cut it out as far is it would go into the inner wheel well, and rolled the lip in also. Be careful with the rear because there are 3 layers of sheet metal there, and when you cut it they come apart and are a pain in the ass to roll all 3 of them together. As far as cutting them I used my air cut off wheel, and sawzall. I rolled them in with a pipe wrench, and finished off the lip with a hammer. Cool!! What IFS mods do you have to go along with those 35's?? You haven't regeared, have you?? How does the motor handle those?? B It has rough country upper control arms, Jeep grand cherokee coils in the rear, cranked torsion bars, rough country shocks, and stock 4.6 gears. The only time I notice any power loss is in 5th gear. The 2.4 doesn't have much power to begin with. the 4.6's help. Link to comment Share on other sites More sharing options...
GrimGreg Posted January 21, 2010 Share Posted January 21, 2010 On 4drs you would have to cut up to the edge of the rear door to fit the 35s. Link to comment Share on other sites More sharing options...
SamTex Posted January 22, 2010 Share Posted January 22, 2010 No body lift yet. Just 3 inch suspension and a lot of cutting. Those are my new 35's Whats the backspace on your wheels and width of the tires? Link to comment Share on other sites More sharing options...
Morningwould Posted January 23, 2010 Share Posted January 23, 2010 Whats the backspace on your wheels and width of the tires? The wheels are 15x8 with a 4" back spacing. The tires are 35x12.50x15 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now