XcrawlerkidX Posted November 10, 2009 Share Posted November 10, 2009 (edited) I have a 1994 Nissan Pathfinder and sometimes the speed gage will work and it wont. Same with the RPM gage it will work then it wont work. Does anybody have a way to fix this proplem? Is it just with the 94 Pathfinders? If anybody has any answers thank you for your help. Also sometimes when it sits the RPM gage will go below 5,000 RPM and sometimes it will shut off. Does any one know why? I was thinking it was the sensor gage? but i don't know. Thanks for the help everybody appreciate it. Edited November 10, 2009 by XcrawlerkidX Link to comment Share on other sites More sharing options...
SunnyTK Posted November 10, 2009 Share Posted November 10, 2009 its apparently a common gauge cluster problem for 93-95 pathys Link to comment Share on other sites More sharing options...
Precise1 Posted November 10, 2009 Share Posted November 10, 2009 You have the electronic cluster. The first attempt to fix is to remove the cluster and tighten the brass screws in the rear. They are ground points and can loosen up. Check the connectors for corrosion/cleanliness and reinstall. B Link to comment Share on other sites More sharing options...
XcrawlerkidX Posted November 10, 2009 Author Share Posted November 10, 2009 Ok i.ll try that later on.. Thanks.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now