Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST

1988 poor v6 runs rough


Recommended Posts

On 10/21/2008 at 8:05 AM, bobco said:

what the ohms on the 88 injectors?? dam thing is running great now but cannot be trusted, I hate that in a vechicle!!!

For future readers, TBI injectors should be around 1.5 ohms.  I've tested good injectors at 1.3, 1.4, and 1.5 values in the past. The 1.3ohm died a year later after lots of aggressive driving. I had a bad one that was only 0.9 as well. Always check that first if you suspect a fuel problem, the connector is right on top and super easy to reach.  

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Welcome to NPORA Forums


Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.



  • Create New...