Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST

AC 4 Inch Spindle Lift Kit Price: $685.00


Recommended Posts

  • 12 years later...

It should fit the front but the problem will be lifting the rear - maximum spring lift is 2", then you need to drop the subframe as well. You'll also need longer brake lines to match in the rear.

PSR in Aussie do a rear subframe drop kit and so do Calmini.

Link to comment
Share on other sites

The spindle in question is for 2wd applications only...but mainly because it's just the spindles.  I'm sure they'll physically fit 4WD applications (Frontier, Xterra, and Pathfinder), but without all the cradles and brackets to bring the LCAs and differential down, it'll surely be a CV buster.  There are several full fits that include all that stuff and probably fit all the same.  To match the lift, will need a rear subframe drop and lift springs, among other bits.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Welcome to NPORA Forums


Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.



  • Create New...